BURL B80-BMB3 MOTHERSHIP Manuale di avvio rapido - Pagina 8
Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di registrazione BURL B80-BMB3 MOTHERSHIP. BURL B80-BMB3 MOTHERSHIP 15. Bmb3 rev c rom 1
Stampa la pagina2.5 Set BMB3 Front Panel to INT, EXT, or DANTE
Image 9: BMB3 Front panel. Set Clock Control to INT, EXT, or DANTE
•
When using the B80 on internal clock, set to INT.
•
If using external word clock, set to EXT.
•
When clocking off Dante network, set to DANTE.
For a complete guide to Dante Clocking, see page 12.
2.6 Connect The Computer's Native Ethernet Port To Gigabit
Ethernet Switch
Even when using a Dante PCIe Card, Dante Controller requires a native Ethernet port and will
not work via the PCIe Card.
2.7 If Using A PCIe Card, Connect Primary Port Of PCIe Card
To Gigabit Ethernet Switch
When using a Dante PCIe Card, audio is transmitted via the PCIe card.
2.8 For INT, Set BMB3 To Desired Sample Rate
Push the "Sample Rate" button on BMB3 faceplate to toggle through sample rates. When set
to INT, BMB3 must always be manually set to the desired sample rate. When using EXT or
DANTE clock, the MOTHERSHIP will not need to be manually set via the front panel.
2.9 For Dante Virtual Soundcard (DVS), Open And Run DVS
2.10 Open "Dante Controller"
SECTION 2
7