Aquascape Pro 7500 Manuale di istruzioni per l'installazione e la manutenzione - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione e la manutenzione per Pompa dell'acqua Aquascape Pro 7500. Aquascape Pro 7500 16.

Stampa la pagina

1. Electrical Connections

Check Valve:

With the skimmer properly installed in ground, feed flex PVC discharge pipe leading to the

BioFalls

through hole in back of skimmer (see Fig.1 on page 5). Slide collar piece over PVC

FIRST, then glue pipe end cap to PVC tubing (see fig. 2 on page 5). The fitting on the bottom

of the Aquascape check valve assembly should be threaded into the pump discharge. Stand-

ing behind the Skimmer set the pump along the right side, inside the skimmer vault (see Fig.

3 on page 6). Connect the check valve assembly by sliding the collar up to the check valve

and tightening (see Fig. 4 on page 6)*.

*See installation instructions for other aspects of pump and pond maintenance.

Submergence:

It is recommended that the pump be operated in the submerged condition. The pump is

equipped with a thermal protector which will shut down the pump temporarily in low water

conditions. However, this is not recommended for extended periods of time.

Discharge:

An Aquascape check valve is recommended for each pump being used. The Aquascape check

valve is used to prevent backflow into the sump. Excessive backflow can cause flooding

and/or damage to the pump.

The Aquascape Ecosystem

The Aquascape Skimmer

sweeps the pond surface,

prevents the pump from

clogging, and hides

everything!

A rock lid hides

the skimmer.

Flexible PVC piping runs

alongside the pond and

makes pluming easy.

Eliminate unsightly plant pots by

digging a plant pocket and filling it

with soil and cat liter.