Aquatec Beluga Istruzioni per il montaggio

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Aiuto per il bagno Aquatec Beluga. Aquatec Beluga 2. Change of actuator
Anche per Aquatec Beluga: Istruzioni per il montaggio (4 pagine), Istruzioni di montaggio (3 pagine), Istruzioni per il montaggio (4 pagine)

ASSEMBLY INSTRUCTIONS

Assembly of Headrest AQUATEC BELUGA

Please read the entire assembly instructions carefully before beginning the assembly!

DELIVERY ITEMS:

Headrest AQUATEC FORTUNA / BELUGA, white

Consisting of:

4 Mountings (plastic part)

4 Flat-headed screws size Ø 4 x 20 (VA)

1 Bracket – round steel Ø 8 (VA)

1 Cover – woven mat with Velcro fastener

PREPARATION:

For backrest with existing assembly drill holes for mounting the headrest

(4 holes for flat-headed screws and 4 holes for fixing pegs).

1.) have a cross-tip screwdriver size 2 available

2.) unbutton the backrest cover

For backrest without assembly drill holes carry out preparations as described above.

Additional tools required: Suitable electric drill (or battery powered drill), countersink 10x90°, twist

drills Ø 4.2 and Ø 5,1 mm.

WORK STEPS:

1. In accordance with the diagram below drill the 4 centres marked with (a) with a Ø 4.2 mm

twist drill.

2. In accordance with the diagram below drill the 4 centres marked with (b) with a Ø 5.1 mm

twist drill.

3. Countersink the 4 holes with Ø 4.2 mm (pos. a) with the countersink on the front side

(cover side) to Ø 8.5 mm (suitable for screw 4 x 20).

4. Deburr the other drill hole edges on both sides with the countersink.

Updated: 01.01.02/Marketing

16126 Assembly headrest Beluga

Order no. 15461

Part 1

Part 2

Part 3

Part 4

Page 1 of 2

V/Allgemein/Montage/Montageanleitungen/

Deutsch/Beluga/Montage Kopfstütze

Order no. 15407

Order no. 13091

Order no. 15446

Order no: 15466

Part 3

Part 4

4 x Part 1 + 2