Aquatec Beluga Instrukcja montażu
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Pomoc w łazience Aquatec Beluga. Aquatec Beluga 2 stron. Change of actuator
Również dla Aquatec Beluga: Instrukcja montażu (4 strony), Instrukcja montażu (3 strony), Instrukcja montażu (4 strony)
ASSEMBLY INSTRUCTIONS
Assembly of Headrest AQUATEC BELUGA
Please read the entire assembly instructions carefully before beginning the assembly!
1.
DELIVERY ITEMS:
Headrest AQUATEC FORTUNA / BELUGA, white
Consisting of:
4 Mountings (plastic part)
4 Flat-headed screws size Ø 4 x 20 (VA)
1 Bracket – round steel Ø 8 (VA)
1 Cover – woven mat with Velcro fastener
2.
PREPARATION:
For backrest with existing assembly drill holes for mounting the headrest
(4 holes for flat-headed screws and 4 holes for fixing pegs).
1.) have a cross-tip screwdriver size 2 available
2.) unbutton the backrest cover
For backrest without assembly drill holes carry out preparations as described above.
Additional tools required: Suitable electric drill (or battery powered drill), countersink 10x90°, twist
drills Ø 4.2 and Ø 5,1 mm.
3.
WORK STEPS:
1. In accordance with the diagram below drill the 4 centres marked with (a) with a Ø 4.2 mm
twist drill.
2. In accordance with the diagram below drill the 4 centres marked with (b) with a Ø 5.1 mm
twist drill.
3. Countersink the 4 holes with Ø 4.2 mm (pos. a) with the countersink on the front side
(cover side) to Ø 8.5 mm (suitable for screw 4 x 20).
4. Deburr the other drill hole edges on both sides with the countersink.
Updated: 01.01.02/Marketing
16126 Assembly headrest Beluga
Order no. 15461
Part 1
Part 2
Part 3
Part 4
Page 1 of 2
V/Allgemein/Montage/Montageanleitungen/
Deutsch/Beluga/Montage Kopfstütze
Order no. 15407
Order no. 13091
Order no. 15446
Order no: 15466
Part 3
Part 4
4 x Part 1 + 2