3cityElectronics FERMIO-EM Manuale d'uso rapido - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso rapido per Sistemi I/O 3cityElectronics FERMIO-EM. 3cityElectronics FERMIO-EM 9.
3.1. Serial port - FERMIO-EM + debug adapter set is required:
1. attach a debug board to Fermio-EM module using connector (J_DB),
2. connect debug board to Your PC using micro-USB connector,
3. connect power connector (J11) and power-up the board with voltage in range 3.5-17 V,
4. run a software supporting communication over serial port e.g. PuTTY,
5. choose "Connection type" as "Serial",
6. enter a port number to "Serial line", which is assigned to FERMIO-EM,
7. speed transmission set to 115200,
8. run the terminal,
9. log in using "root" username (password not required).
3.2. SSH protocol – knowing FERMIO-EM's IP address is required
1. attach LAN cable to RJ45 connector (J5),
2. connect power connector (J11) and power-up the board with voltage in range 3.5-17 V,
3. run a software supporting communication over serial port e.g. PuTTY,
4. choose "Connection type" as "SSH",
5. in "Host name" field enter IP address of your FERMIO device,
6. set "Port" to 22,
7. run the terminal,
8. log in using "root" username (password not required).
Demo applications are located at /usr/FERMIO.
Fermio-EM : User guide
5/9