HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuale di installazione - Pagina 13

Sfoglia online o scarica il pdf Manuale di installazione per Interruttore HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14. 1u rackmount tape enclosure
Anche per HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Istruzioni per l'installazione (2 pagine), Manuale di istruzioni per l'installazione (20 pagine), Nota di rilascio (14 pagine), Istruzioni per l'installazione (2 pagine), Manuale di riferimento (46 pagine)

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuale di installazione
7. Insert the switch with the attached inner rails into the outer rails.
Note:
comparable EIA rack.
Figure 9: Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
This step applies to both the HP System/e rack and the HP 9000 Series or
Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers with one on each side.
Figure 9
and
Figure
10.
See
11
Addendum Pg