HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuel d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 pages. 1u rackmount tape enclosure
Également pour HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM : Instructions d'installation (2 pages), Manuel d'instructions d'installation (20 pages), Note de mise à jour (14 pages), Instructions d'installation (2 pages), Manuel de référence (46 pages)

7. Insert the switch with the attached inner rails into the outer rails.

Note:

comparable EIA rack.

Figure 9: Installing the switch into a rack (HP 9000 Series or comparable EIA rack)

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

This step applies to both the HP System/e rack and the HP 9000 Series or

Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips

pan-head screws with captive star lock washers with one on each side.

Figure 9

and

Figure

10.

See

Addendum Pg