HP XP20000/XP24000 Manuale di configurazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore HP XP20000/XP24000. HP XP20000/XP24000 40. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Anche per HP XP20000/XP24000: Nota di rilascio (13 pagine), Manuale di integrazione (29 pagine), Nota di rilascio (4 pagine), Manuale dell'amministratore (50 pagine), Manuale di configurazione (42 pagine), Manuale di configurazione (40 pagine), Manuale di configurazione (36 pagine), Manuale di configurazione (36 pagine), Manuale di configurazione (30 pagine), Manuale di configurazione (36 pagine), Nota di rilascio (5 pagine), Manuale di configurazione (46 pagine), Manuale di configurazione (46 pagine), Manuale di riferimento (46 pagine), Manuale di configurazione (40 pagine), Manuale di configurazione (44 pagine), Manuale di configurazione (38 pagine), Manuale di configurazione (34 pagine), Manuale di configurazione (30 pagine), Manuale di configurazione (30 pagine)

1 Installing and configuring Tru64 for the

XP disk array

You and the HP service representative each play a role in installation. The HP service representative

is responsible for installing the disk array and formatting the disk devices. You are responsible for

configuring the host server for the new devices with assistance from the HP service representative.

The disk array has the following features:

•

Storage capacity: The storage capacity for each model is listed below:

XP10000: Up to 240 drives for up to 69.2 TB, 48 FC ports

XP12000: Up to 1152 drives for up to 332 TB, 128 FC ports

XP20000: Up to 240 drives for up to 69.2 TB, 48 FC ports

XP24000: Up to 1152 drives for up to 332 TB, 256 FC ports

•

Server support: PCI-based AlphaStation or AlphaServer

•

Operating system support: For supported disk array microcode and OS versions, see the HP

StorageWorks Single Point of Connectivity Knowledge (SPOCK):

http://spock.corp.hp.com

Before installing the disk array, ensure the following requirements are met:

•

Fibre Channel Adapters (FCAs): Install FCAs and all utilities and drivers. Refer to the adapter doc-

umentation for installation details.

•

HP StorageWorks XP Remote Web Console, or HP StorageWorks XP Command View with LUN

management feature for configuring disk array ports and paths.

•

HP StorageWorks XP Array Manager.

•

Check with your HP representative for other XP software available for your system.

The XP family of disk arrays supports these Fibre Channel elements:

•

Connection speeds of 1 Gbps, 2 Gbps, and 4 Gbps

•

Short-wave non-OFC (open fiber control) optical interface

•

Multimode optical cables with SC or LC connectors

•

Fibre Channel switches

Even though the interface is Fibre Channel, this guide uses the term "SCSI disk" because disk array

devices are defined to the host as SCSI disks.

XP Disk Array Configuration Guide for Tru64 UNIX