HP XP20000/XP24000 Configuration Manual - Page 7

Browse online or download pdf Configuration Manual for Switch HP XP20000/XP24000. HP XP20000/XP24000 40 pages. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Also for HP XP20000/XP24000: Release Note (13 pages), Integration Manual (29 pages), Release Note (4 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), Configuration Manual (46 pages), Configuration Manual (46 pages), Reference Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages)

HP XP20000/XP24000 Configuration Manual
1 Installing and configuring Tru64 for the
XP disk array
You and the HP service representative each play a role in installation. The HP service representative
is responsible for installing the disk array and formatting the disk devices. You are responsible for
configuring the host server for the new devices with assistance from the HP service representative.

Features and requirements

The disk array has the following features:
Storage capacity: The storage capacity for each model is listed below:
XP10000: Up to 240 drives for up to 69.2 TB, 48 FC ports
XP12000: Up to 1152 drives for up to 332 TB, 128 FC ports
XP20000: Up to 240 drives for up to 69.2 TB, 48 FC ports
XP24000: Up to 1152 drives for up to 332 TB, 256 FC ports
Server support: PCI-based AlphaStation or AlphaServer
Operating system support: For supported disk array microcode and OS versions, see the HP
StorageWorks Single Point of Connectivity Knowledge (SPOCK):
http://spock.corp.hp.com
Before installing the disk array, ensure the following requirements are met:
Fibre Channel Adapters (FCAs): Install FCAs and all utilities and drivers. Refer to the adapter doc-
umentation for installation details.
HP StorageWorks XP Remote Web Console, or HP StorageWorks XP Command View with LUN
management feature for configuring disk array ports and paths.
HP StorageWorks XP Array Manager.
Check with your HP representative for other XP software available for your system.

Fibre Channel interface

The XP family of disk arrays supports these Fibre Channel elements:
Connection speeds of 1 Gbps, 2 Gbps, and 4 Gbps
Short-wave non-OFC (open fiber control) optical interface
Multimode optical cables with SC or LC connectors
Fibre Channel switches
Even though the interface is Fibre Channel, this guide uses the term "SCSI disk" because disk array
devices are defined to the host as SCSI disks.
XP Disk Array Configuration Guide for Tru64 UNIX
7