Panasonic PT-AE1000 Manuale di istruzioni per l'uso - Pagina 12
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Proiettore Panasonic PT-AE1000. Panasonic PT-AE1000 28. Panasonic lcd projector operating instructions
Anche per Panasonic PT-AE1000: Manuale di istruzioni per l'uso (28 pagine)
Stampa la pagina
Remote control operation
You can operate the projector with the
Remote control
within the remote range 7 m.
%
Facing to the projector
Ensure the
Remote control emitter
is facing to
the
Remote control signal receptor
on front of
the projector and press the required buttons to
operate.
# Facing to the screen
Ensure the
Remote control emitter
is facing to
the screen and press the required buttons to
operate the projector. The signal will be reflected
off the screen. The operating range may differ due
to the screen material.
NOTE:
• The
Remote control
may malfunction under
strong light such as a fluorescent. Do not let
strong light shine onto the signal receptor.
• If there are any obstacles in between the remote
control unit and the receptor, the
Remote control
may not operate correctly.
LIGHT
In a dark room, you can turn on the button
acklight to operate the
Remote control.
Press the button on the upper right corner of
the unit to turn on the backlight and enter
the light-on mode
After 30 seconds without any operation, the backlight
will go out. Press any but the
LIGHT
button to turn on
again. To escape from the light-on mode, press the
LIGHT
button.
Resetting to the factory default settings
You can reset most of the customised
settings to the factory defaults by pressing
EFAULT
button of the
Remote control.
Display the required sub menu or the menu
^terns and press the button again. See
Main menu and Sub-menu" on oaae
NOTE:
• Some menu items are not available to reset by
pressing the
DEFAULT
button. Adjust each menu
items manually.
NOTE:
• Escaping from the freeze mode is available by
pressing any button except the
LIGHT
button.
Remote control operation
Switching the input signal
You can switch the input method manually
by pressing the
INPUT
button. Press the
button several times or press ◄ ► to cycle
through the input methods as follows. The
actual projected image will be changed in a
while.
Graphical guidance will be displayed on the upper right
of the display and you can confirm the selected input
method which is hilighted in yellow. See "INPUT
GUIDE" on page 38.
Connected to
COMPONENT
IN
terminal equipment's
signal
Connected to
SCART IN
terminal equipment's signal
Connected to
S-VIDEO IN
terminal equipment's signal
Connected to
VIDEO IN
terminal equipment's signal
Connected to
HDMI
terminals
equipment's signal
Connected to PC
IN
terminal
equipment's signal
NOTE:
• If you select an unplugged input method, the
guidance will blink on and off several times.
• See "List of compatible signals" on page 45.
• See "Connections" on page 18.
Switching the aspect ratio
The aSpect ratio is selected automatically,
ASPECT
or you can switch it manually by pressing
the
ASPECT
button. Press the button
several times to cycle through the different
aspect type as follows. See "ASPECT" on
page 35.
VIDEO/
S-VIDEO/
COMPONEN
T(YPbPr)
PC (RGB)
ZOOM2
ZOOM1
14:9
W
JUST
NOTE:
• If you project an image with an unmatched aspect
ratio, the image may distort or some portions may
be cropped. Select an aspect ratio which
preserves the intention of the image creator.
• The order of
ASPECT
types is defined not only by
the input method but also by the input signals.
See "List of compatible signals" on page 45.
• If you project a copyrighted image enlarged or
distorted by using
ASPECT
function in
commercial use in a public place, such as a
restaurant or hotel, you might infringe on the
copyright of the creator which is protected by
copyright law.