Panasonic PT-AE1000 Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic PT-AE1000. Panasonic PT-AE1000 28 pagina's. Panasonic lcd projector operating instructions
Ook voor Panasonic PT-AE1000: Gebruiksaanwijzing (28 pagina's)

Pagina afdrukken

Remote control operation

You can operate the projector with the

Remote control

within the remote range 7 m.

Facing to the projector

Ensure the

Remote control emitter

is facing to

the

Remote control signal receptor

on front of

the projector and press the required buttons to

operate.

# Facing to the screen

Ensure the

Remote control emitter

is facing to

the screen and press the required buttons to

operate the projector. The signal will be reflected

off the screen. The operating range may differ due

to the screen material.

NOTE:

• The

Remote control

may malfunction under

strong light such as a fluorescent. Do not let

strong light shine onto the signal receptor.

• If there are any obstacles in between the remote

control unit and the receptor, the

Remote control

may not operate correctly.

LIGHT

In a dark room, you can turn on the button

acklight to operate the

Remote control.

Press the button on the upper right corner of

the unit to turn on the backlight and enter

the light-on mode

After 30 seconds without any operation, the backlight

will go out. Press any but the

LIGHT

button to turn on

again. To escape from the light-on mode, press the

LIGHT

button.

Resetting to the factory default settings

You can reset most of the customised

settings to the factory defaults by pressing

EFAULT

button of the

Remote control.

Display the required sub menu or the menu

^terns and press the button again. See

Main menu and Sub-menu" on oaae

NOTE:

• Some menu items are not available to reset by

pressing the

DEFAULT

button. Adjust each menu

items manually.

NOTE:

• Escaping from the freeze mode is available by

pressing any button except the

LIGHT

button.

Remote control operation

Switching the input signal

You can switch the input method manually

by pressing the

INPUT

button. Press the

button several times or press ◄ ► to cycle

through the input methods as follows. The

actual projected image will be changed in a

while.

Graphical guidance will be displayed on the upper right

of the display and you can confirm the selected input

method which is hilighted in yellow. See "INPUT

GUIDE" on page 38.

Connected to

COMPONENT

terminal equipment's

signal

Connected to

SCART IN

terminal equipment's signal

Connected to

S-VIDEO IN

terminal equipment's signal

Connected to

VIDEO IN

terminal equipment's signal

Connected to

HDMI

terminals

equipment's signal

Connected to PC

terminal

equipment's signal

NOTE:

• If you select an unplugged input method, the

guidance will blink on and off several times.

• See "List of compatible signals" on page 45.

• See "Connections" on page 18.

Switching the aspect ratio

The aSpect ratio is selected automatically,

ASPECT

or you can switch it manually by pressing

the

ASPECT

button. Press the button

several times to cycle through the different

aspect type as follows. See "ASPECT" on

page 35.

VIDEO/

S-VIDEO/

COMPONEN

T(YPbPr)

PC (RGB)

ZOOM2

ZOOM1

14:9

JUST

NOTE:

• If you project an image with an unmatched aspect

ratio, the image may distort or some portions may

be cropped. Select an aspect ratio which

preserves the intention of the image creator.

• The order of

ASPECT

types is defined not only by

the input method but also by the input signals.

See "List of compatible signals" on page 45.

• If you project a copyrighted image enlarged or

distorted by using

ASPECT

function in

commercial use in a public place, such as a

restaurant or hotel, you might infringe on the