DiaTecne PulsePen WPP001-ETT Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature mediche DiaTecne PulsePen WPP001-ETT. DiaTecne PulsePen WPP001-ETT 16.

Maintenance and Cleaning

No particular periodic maintenance or calibration operations are required on the instrument.

⚠ In the case of prolonged non-use, remove batteries.

⚠ Before use, the metallic disc of the wTn1 probe, the patient cable CV010 and the probe's case must be

cleaned, using a clean, dry cloth or dampened with a small quantity of alcohol.

⚠ Be very careful to keep the alcohol or other liquids from penetrating into the wTn1 probe or into the

other units because this could cause serious problems, irreparably damaging internal parts.

⚠ The CV010 Ecg cables are thin and flexible in order to be easily handled. One must avoid pulling or

bending them at sharp angle so as not to damage them.

⚠ It is very important to read the following items before the use of the device. Improper use may cause

very severe consequences.

• This equipment is intended to be used only by medical/paramedical personnel in medical environment.

• Do not use the equipment in operating room, or in any case where there are inflammable gases/

substances.

• Do not use the equipment for invasive or intra-cardiac applications or at direct contact with internal body

parts.

• Data elaboration must be performed by the doctor through dedicated software.

• Do not sterilize neither in autoclave nor with liquid substances.

• Avoid mechanical shocks to the pressure plunger of the wTn1 probe, like collisions or falls.

• Regularly clean the disc of the wTn1 probe, the terminals of the patient cable CV010 and the case after

each use, as indicated in the "Maintenance and Cleaning".

• Keep the units wTn1 and wEc1, with its patient cable, at a distance of no less than 1.5 meters from the

computer and the same computer at no less than 1.5 meters from the patient.

• Avoid touching simultaneously any part of the computer, including the wRs1 unit, and one or both of the

wEc1, including the patient cable, and the wTn1 units.

• Do not immerse any part of the device into water or other substances, or expose it to sprays. Absolutely

never use Gel on the pressure sensor of wTn1.

• Do not open the device for any kind of maintenance work; in the case of malfunction of the device, contact

DiaTecne s.r.l.

• In the case of any abrasion, sheath damage, or any kind of defects appears in the patient cable CV010,

immediately suspend use of the device and contact Diatecne s.r.l. for repair/replacement.

• Do not use the device if breakage occurs to any part, do not try to repair it but contact Diatecne s.r.l. for

repair/replacement.

• Do not make changes of any kind to the device and never use accessories other than those provided.

• Keep the tonometric probe wTn1 and patient cable CV010 terminals away from electrical outlets/sockets

and surfaces where there may be potentially dangerous voltages.

• Use a battery-powered (portable) computer or, alternatively, an AC-powered computer, compliant with the

current medical regulations.

• Use the device at a safe distance from sources of electromagnetic disturbance such as cordless telephones

operating at radio frequency/cellular phones, Bluetooth and WiFi devices or other equipments emitting

high frequency electromagnetic waves.

• During examination, keep the wEc1 unit at a distance of at least 20 cm away from both the patient and

operator, limit the duration of contact of the wTn1 unit with both patient and operator for the time

! 8

User Manual PulsePen - V. 4.6