DiaTecne PulsePen WPP001-ETT Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature mediche DiaTecne PulsePen WPP001-ETT. DiaTecne PulsePen WPP001-ETT 16.

Stampa la pagina
The correct use of wEc1 and wTn1 units is based on the assumption that one of them must be set as
Sensor1 and the other as Sensor2: wEc1 is always set as Sensor1 and cannot be modified while wTn1 can
be set in the two different ways: pls refer to the software online Help for the operating instructions.
Allowed Combinations:
wEc1 - Sensor1 (1 beep at switch on) + wTn1 set as Sensor 2 (2 beeps at switch on). These are the factory
settings for the WPP001-ET system and for the wTn1 unit with black ring of the WPP001-ETT system:
[
]
✔
wTn1 set as Sensor 1 (1 beep at switch on) + wTn1 set as Sensor 2 (2 beeps at switch on). These are the
factory settings for the wTn1 units respectively with red and black ring of the WPP001-ETT system:
[
]
✔
Wrong Combinations:
wEc1 - Sensor 1 (1 beep at switch on) + wTn1 set as Sensor 1 (1 beep at switch on):
[ ✘]
Both the wTn1 modules set as Sensor 1 (1 beep at switch on) or set as Sensor 2 (2 beeps at switch on):
[
]
✘
[ ✘]
+
+
+
+
+
! 7
!
User Manual PulsePen - V. 4.6