Olympus U-AW Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Microscope Olympus U-AW. Olympus U-AW 16. Motorized attenuator wheel

When using IX83/IX73

Loosen the U-LHEAD clamping screws a , and separate the U-LHEAD to 2 units: one for the frame and the other for

the lamp housing. One for the frame displays [FRAME] and the other for the lamp housing displays [

Loosen the lamp housing clamping screws b (2 pcs.) on the fluorescence illuminator sufficiently using the Allen

screwdriver, fit the mount dovetail c of the U-LHEAD (frame side) and tighten the clamping screws b .

Attach the U-AW d to the U-LHEAD (frame side), and tighten the clamping screws a .

Loosen the clamping screws e (4 pcs.) of the U-AW, fit the U-LHEAD (lamp housing side) f and tighten the clamping

screws e (upper 2 pcs. only).

Attach the lamp housing g to the U-LHEAD (lamp housing side) f in the same way as above.

Insert one end of the interface cable into the connector h and insert the other end into the control box IX3-CBH or

control box IX3-CBM (see "SYSTEM CHART").

U-AW