Olympus PT-E03 Manuale di istruzioni - Pagina 20

Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories Olympus PT-E03. Olympus PT-E03 41. Underwater case for digital camera e-410/e-400

Stampa la pagina

How to attach the camera table to the digital camera

In order to load the camera into the Case, attach the camera table (located on the front-lid side of the

Case) to the digital camera.

1 Attach the camera table to the tripod seat section on

the bottom of the digital camera. Use the camera's

tripod screw hole for attaching.

2 The camera table has fixed up-down and front-rear

orientations. To ensure that it is properly attached,

refer to the illustration on the right.

Using the electronic flash

To attach the combination of the FL-20 Electronic Flash and the PFL-01 underwater flash case or the

FL-36 Electronic Flash and the PFL-E01 underwater flash case to this Case, connect the hot shoe cable

provided with the PFL-01 or PFL-E01 to the camera and to the hot shoe cable connector on the front lid

side of this Case as described below. Note that the camera's built-in flash cannot be used when an

external electronic flash and case are installed. Be sure to set the automatic pop-up setting of the camera

to OFF so that the builtin flash will not pop up automatically.

1 Before loading the camera in the Case, connect the

hot shoe cable's connector to the Case's hot shoe

cable connector.

EN 19

Front

Down

Rear