Alphamount APPSLTK1 Manuale di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per Supporto per TV Alphamount APPSLTK1. Alphamount APPSLTK1 12. Large tilting tv wall mount

3B-1

Position the wall plate at your

desired height, level the wall plate

and mark the pilot hole locations.

3B-3

Use the hammer to knock

anchors [O] into the wall.

Be sure the anchors [O] are

seated ﬂush with the

concrete surface.

3B-2

Drill 4 pilot holes using a 3/8 in.

(10mm) diameter drill bit. Make sure

the depth is not less than 2 3/4 in.

(70mm). Never drill into the mortar

between blocks.

Install wall plate using lag screws [G]

and washers [H] only until the washers

[H] are pulled ﬁrmly against the wall

plate. DO NOT over-tighten the lag

screws [G].

2 3/4 in. (70mm)

ø3/8 in. (10mm)

1/2 in. (13mm)

Socket Wrench