Alphamount APPSLTK1 Gebruiksaanwijzing - Pagina 10
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Alphamount APPSLTK1. Alphamount APPSLTK1 12 pagina's. Large tilting tv wall mount
Pagina afdrukken
3B-1
Position the wall plate at your
desired height, level the wall plate
and mark the pilot hole locations.
3B-3
O
Use the hammer to knock
anchors [O] into the wall.
Be sure the anchors [O] are
seated flush with the
concrete surface.
3B-2
Drill 4 pilot holes using a 3/8 in.
(10mm) diameter drill bit. Make sure
the depth is not less than 2 3/4 in.
(70mm). Never drill into the mortar
between blocks.
H
G
Install wall plate using lag screws [G]
and washers [H] only until the washers
[H] are pulled firmly against the wall
plate. DO NOT over-tighten the lag
screws [G].
9
2 3/4 in. (70mm)
ø3/8 in. (10mm)
1/2 in. (13mm)
Socket Wrench