ARC MJLT-2005 Manuale - Pagina 11

Sfoglia online o scarica il pdf Manuale per Telecomando ARC MJLT-2005. ARC MJLT-2005 20. Shutter remote control & receiver module

Issue date: 29/7/2021

There are wide variety of shutters, curtains, and motorised electronics in the

market. So, for a better performance the receiver module has a calibration

features built in.

For the shutter to position properly, we must firstly set up the maximum and

minimum level of the actual shutter you wish to control.

Carefully follow the below procedure with each individual receiver modules.

Set up within receiver module

1. On the receiver module press SET button for 3 seconds, both LED on

module will flash.

2. Press DOWN  button once to close the shutter and once it reaches to the

bottom, press the DOWN  button again. (Minimum level is now stored)

3. Press UP  button once to open the shutter and once it reaches to the top,

press the UP  button again. (Maximum level is now stored)

4. To complete the set-up mode, press SET button for 3 seconds, both LED on

module will quick flash to confirm.

 If no signal is given within the 30 second time frame, the receiver will exit

the set-up mode.)

MOTOR CALIBRATION

7. Motor Calibration