Arcade ARC13 Istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Prodotto idraulico Arcade ARC13. Arcade ARC13 5. Single lever bidet mixer with pop up waste

Stampa la pagina

Beautifully

Traditional

MAINTENANCE

Note : Remember to turn oﬀ the water supply before commencing any maintenance.

Cleaning the headwork

The concealed headwork should give trouble free service, but in the event of any

problem, service is straight forward.

To remove the headwork

Unscrew the top of the tap and then use a suitable adjustable spanner (not supplied)

to loosen the nut. Take the headwork out and wash it with clean running water.

Make sure any trapped debris has been removed. Dry and lightly grease the seal

(only use silicone grease). Reﬁt the headwork followed by the handle body and lever.

CLEANING

The nickel/chrome plate we use on our taps is very durable, nevertheless care should

be taken when cleaning. It should be cleaned only with warm soapy water followed by

rinsing with clean water and drying with a soft cloth. All ﬁnishes are vulnerable to

acid attack and some strong substances such as household cleaners, disinfectants,

denture cleaners, hair dyes, wine making and photographic chemicals can cause

the surface to go black or peel.

Arcade single lever bidet mixer

with pop up waste

FILTER CLEANING

Taps are supplied with two diﬀerent ﬁlters : low pressure Flow Straigteners

( factory ﬁtted ) and high pressure Neoperl Aerators ( in the box ). These ﬁt

into the front of the tap nozzle.

Before use : unscrew the ﬁlter and allow the water to run freely for 5 minutes.

Screw the ﬁlter back into the nozzle once all impurities have been ﬂushed from

the water supply.

Periodically : Using the key provided in the box unscrew the ﬁlter from the nozzle

and rinse with clean running water. Once all loose debris and dirt has been cleared

replace the ﬁlter into the nozzle and tighten with the key provided.

NOZZLE

ARC13, ARC13 CHR

NOZZLE