Arcam T32 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Sintonizzatore Arcam T32. Arcam T32 20.

Stampa la pagina

1. Specifications

Mains switch

This switch isolates the unit from

mains power. The unit can be

placed in low power standby using

the

button on the front

sTandby

panel or P on the remote control

Power inlet

Connect the correct

mains cable here.

��

Ensure the voltage selected matches

This socket can either be used in conjunction with the

RS232 port for the connection of an rDock, or as a

standard line level input (see page 13).

Remote in

This allows remote-control

signals to be received by the T32

if the remote sensor is covered or

otherwise 'invisible' to the remote

control (see page 4).

��

Voltage select

the local power supply.

Program switch

For use by your Arcam dealer

during installation of software

updates.

RS232 control

This is used for connecting an rDock or rLead for

iPod® control (see page 6), or for controlling the T32

from a remote computer.

Your Arcam dealer can provide a copy of the RS232

remote control protocol if required.

Aux input

DAB aerial input

This input can be used with the ribbon aerial

provided, or connected to an external aerial (of the

correct type) if required.

��

�

��

�

��

Analogue audio outputs

Connect these to your amplifier's tuner (or other line-

level) input using suitable high quality interconnect

cables. Ensure that the left and right audio outputs

from the T32 are connected to the corresponding left

and right inputs on your amplifier.

The second set of sockets can be used to connect to

a second amplifier set up for multi-room use, or for

direct recording.

E-5

(if fitted)

Sirius input

This input is for a SiriusConnect™ Home Tuner

module. Sirius is a subscription radio service that is

available throughout North America.

��

AM aerial input

Connect the two AM Loop aerial

leads – they are not polarised. In

addition, a 3m–5m external wire

can be fixed to

to improve

aM Loop

reception (see page 9).

FM aerial input

This input can be used with the ribbon aerial

provided, or connected to an external aerial (of the

correct type) if required. In Europe, a Belling-Lee

connector is used; in North America, an F-type

(screw) connector is used.