Arcam fmj UDP411 Manuale - Pagina 10

Sfoglia online o scarica il pdf Manuale per Lettore Blu-ray Arcam fmj UDP411. Arcam fmj UDP411 13. Blu-ray disc player arcam fmj udp411

Arcam fmj UDP411 Manuale
(e.g. BD, DVD, CD) will play automatically after it has
To set the parental control level:
loaded.
>
1.
Select 'Settings'
'Parental Control'
On: Optical discs will play automatically.
<
2.
If Parental Control is set to 'On' , enter your PIN
Off: play must be pressed to play a disc.
using the remote control numeric buttons. The
<
default PIN is
.
CEC – The Consumer Electronics Control (CEC) option
0000
is used to allow all supported devices connected by
3.
Once the Parental Control menu is accessed, press
'
,
HDMI to work together as a single system.
the
/
cursor buttons and press
select an item.
CEC may be turned 'On' or 'Off ' , to link or unlink the
Parental Control – Set whether Parental Control is 'On'
remotes.
or 'Off ' .
Firmware Update – You can check for an upgrade to
Off: All discs are played back.
your player's firmware by selecting this menu item and
<
pressing
to highlight 'Network' , then press
again.
On: Disc playback is restricted according to the
OK
OK
<
Parental Level set in the following menu item.
A message appears if no new firmware is available,
otherwise follow the on-screen instructions. A message
Parental Level – Set the degree of disc restriction. The
tells you when the upgrade is complete. Press
.
lower the value, the stricter the limitation.
OK
Load Defaults – Press
with this item highlighted to
OK
1
Kid Safe: Suitable for children.
reset all settings to factory defaults (including parental
2
G: All children and general audience.
controls).
3
PG: Parental guidance suggested.
You are asked to confirm that you want to load the
factory default settings. For 'No' press
; for 'Yes' press
OK
4
PG-13: Unsuitable for children under 13.
<
then OK.
5
PG-R: Parental guidance recommended.
System Information – Highlight this option and press
6
R: Restricted; cinemas require children under
twice to display system information.
OK
the age of 17 to have an accompanying adult
The System Information panel shows information about
parent or guardian.
your player, such as the serial number and firmware
7
NC-17: Cinemas do not admit anyone
version.
younger than 17 years old.
BD-Live Storage – This last System option allows you
8
Adult: Adult rating; discs of any rating
to review or delete BD-Live data stored on an external
USB drive.
(Adult/General/Children) can be played back.
The options are:
NOTE
Information: Highlight and press
to show file
<
OK
If the parental control level is set and you
<
information on the BD-Live data.
try to play a disc with a level higher than the
Erase data: Highlight and follow the on-screen
<
current parental level, a password panel opens.
instruction to erase BD-Live storage data.
<
If an attempt to change the parental control
or parental level is made, a password panel
Security/Parental Control
opens.
Change Password – Sets or changes the 4-digit
password. Press the
buttons for the current password
0–9
(the initial password is
), then press
.
0000
OK
Enter the new password to confirm, then press
.
OK
Parental Control – Parental control settings can be
used to prevent the viewing of material inappropriate
for children. According to the level set, a disc may be
stopped or have certain scenes cut or substituted with
alternative scenes, depending on the disc.
Cinavia Notice
>
This product uses Cinavia technology to limit the
use of unauthorised copies of some commercially-
produced film and videos and their soundtracks. When
a prohibited use of an unauthorised copy is detected, a
message will be displayed and playback or copying will
to
OK
be interrupted.
More information about Cinavia technology is provided
at the Cinavia Online Consumer Information Centre
at http://www.cinavia.com. To request additional
information about Cinavia by mail, send a postcard with
your mailing address to:
Cinavia Consumer Information Centre,
P.O. Box 86851,
San Diego,
CA, 92138
USA
E-18
trouble-
Problem
Possible cause
shooting
No power
<
The AC input cord is disconnected.
Poor connection at AC wall outlet or the outlet is inactive.
<
No playback
The disc is loaded upside down.
<
The disc is not playable.
<
The disc is dirty.
<
<
The recorded disc is not correctly finalized.
The parental level is not set correctly.
<
The symbol about invalid operation is displayed.
<
If a fault occurs, check this troubleshooting table before
Malfunction
The disc is scratched, dirty, poorly recorded or unplayable.
<
taking your unit for repair.
If the fault persists, attempt to solve it by switching the
No picture
The video cords are disconnected.
<
unit off and on again.
The incorrect selection of input source on the TV.
<
If this fails to resolve the situation, consult your dealer.
The disc is not playable.
<
Under no circumstances should you repair the unit
Noisy or distorted
The unit is connected to a recording device directly and the copyguard
<
yourself as this will invalidate the guarantee!
picture
function is activated.
The disc is dirty.
<
It is in rapid advance or reverse playback, or in frame advance playback.
<
Abnormal picture or no
The resolution is not set correctly for video signals to be output from the
<
picture
COMPONENT and the HDMI OUTs.
The TV does not support HDCP.
<
The TV System of this unit does not match either your TV or the disc.
<
Slight pause of picture
A layer transition occurs during playback of DVD Videos, etc. in dual-
<
layer format.
No sound
The audio cords are disconnected.
<
<
The speakers are disconnected to the amplifier.
The incorrect selection of input source on the amplifier.
<
Noisy or distorted sound
The disc is dirty.
<
Poor connections.
<
BD-LIVE contents
Poor connections between this unit and broadband router and/or
<
cannot be loaded
modem.
The USB memory device is disconnected.
<
The BD-Live Internet Access is set to 'Prohibit Access'.
<
The BD disc does not support BD-LIVE.
<
The network settings are not set correctly.
<
Remote control unit does
<
Batteries are not loaded or exhausted.
not operate.
The remote sensor is obstructed.
<
Remedy
<
Connect cord securely.
Check the outlet using a lamp or another appliance.
<
Reload the disc with the printed side up.
<
Use a playable disc.
<
Clean the disc.
<
<
Load a disc that is correctly finalized.
Set the parental level setting correctly: see page E-18.
<
Adjust the setting correctly.
<
Press the POWER switch to switch the power off, press the
<
POWER switch again and then unload the disc.
Connect the cords correctly.
<
Select the input source correctly.
<
Use a playable disc.
<
Connect the unit so that the picture signal is
<
transferred directly to the TV.
<
<
Clean the disc.
Sometimes a small amount of picture distortion may
<
appear. This is not a malfunction.
<
Set the resolution correctly: see page E-16.
<
This unit will not transfer the video signals via the HDMI
<
connector to TV that does not support HDCP. This is not a
malfunction.
Set the TV type correctly: see page E-16.
<
Sometimes a slight pause may occur. This is not a
<
malfunction.
Connect the cords correctly.
<
<
Connect the speakers correctly.
Select the input source correctly.
<
Clean the disc.
<
Check the connections and connect all cords securely.
<
Check the connections and connect all cords securely.
<
Connect the USB memory device to this unit.
<
Set it to 'Always Allow Access': see page E-17.)
<
Load a disc that supports BD-LIVE.
<
<
Set the network settings correctly: see page E-17.
<
Replace the batteries.
Remove the obstacle.
<
E-19