Arcam fmj UDP411 Manual - Página 10

Procurar online ou descarregar pdf Manual para Leitor de Blu-ray Arcam fmj UDP411. Arcam fmj UDP411 13 páginas. Blu-ray disc player arcam fmj udp411

Imprimir página

(e.g. BD, DVD, CD) will play automatically after it has

To set the parental control level:

loaded.

Select 'Settings'

'Parental Control'

On: Optical discs will play automatically.

If Parental Control is set to 'On' , enter your PIN

Off: play must be pressed to play a disc.

using the remote control numeric buttons. The

default PIN is

CEC – The Consumer Electronics Control (CEC) option

0000

is used to allow all supported devices connected by

Once the Parental Control menu is accessed, press

HDMI to work together as a single system.

the

cursor buttons and press

select an item.

CEC may be turned 'On' or 'Off ' , to link or unlink the

Parental Control – Set whether Parental Control is 'On'

remotes.

or 'Off ' .

Firmware Update – You can check for an upgrade to

Off: All discs are played back.

your player's firmware by selecting this menu item and

pressing

to highlight 'Network' , then press

again.

On: Disc playback is restricted according to the

Parental Level set in the following menu item.

A message appears if no new firmware is available,

otherwise follow the on-screen instructions. A message

Parental Level – Set the degree of disc restriction. The

tells you when the upgrade is complete. Press

lower the value, the stricter the limitation.

Load Defaults – Press

with this item highlighted to

Kid Safe: Suitable for children.

reset all settings to factory defaults (including parental

G: All children and general audience.

controls).

PG: Parental guidance suggested.

You are asked to confirm that you want to load the

factory default settings. For 'No' press

; for 'Yes' press

PG-13: Unsuitable for children under 13.

then OK.

PG-R: Parental guidance recommended.

System Information – Highlight this option and press

R: Restricted; cinemas require children under

twice to display system information.

the age of 17 to have an accompanying adult

The System Information panel shows information about

parent or guardian.

your player, such as the serial number and firmware

NC-17: Cinemas do not admit anyone

version.

younger than 17 years old.

BD-Live Storage – This last System option allows you

Adult: Adult rating; discs of any rating

to review or delete BD-Live data stored on an external

USB drive.

(Adult/General/Children) can be played back.

The options are:

NOTE

Information: Highlight and press

to show file

If the parental control level is set and you

information on the BD-Live data.

try to play a disc with a level higher than the

Erase data: Highlight and follow the on-screen

current parental level, a password panel opens.

instruction to erase BD-Live storage data.

If an attempt to change the parental control

or parental level is made, a password panel

Security/Parental Control

opens.

Change Password – Sets or changes the 4-digit

password. Press the

buttons for the current password

0–9

(the initial password is

), then press

0000

Enter the new password to confirm, then press

Parental Control – Parental control settings can be

used to prevent the viewing of material inappropriate

for children. According to the level set, a disc may be

stopped or have certain scenes cut or substituted with

alternative scenes, depending on the disc.

Cinavia Notice

This product uses Cinavia technology to limit the

use of unauthorised copies of some commercially-

produced film and videos and their soundtracks. When

a prohibited use of an unauthorised copy is detected, a

message will be displayed and playback or copying will

be interrupted.

More information about Cinavia technology is provided

at the Cinavia Online Consumer Information Centre

at http://www.cinavia.com. To request additional

information about Cinavia by mail, send a postcard with

your mailing address to:

Cinavia Consumer Information Centre,

P.O. Box 86851,

San Diego,

CA, 92138

USA

E-18

trouble-

Problem

Possible cause

shooting

No power

The AC input cord is disconnected.

Poor connection at AC wall outlet or the outlet is inactive.

No playback

The disc is loaded upside down.

The disc is not playable.

The disc is dirty.

The recorded disc is not correctly finalized.

The parental level is not set correctly.

The symbol about invalid operation is displayed.

If a fault occurs, check this troubleshooting table before

Malfunction

The disc is scratched, dirty, poorly recorded or unplayable.

taking your unit for repair.

If the fault persists, attempt to solve it by switching the

No picture

The video cords are disconnected.

unit off and on again.

The incorrect selection of input source on the TV.

If this fails to resolve the situation, consult your dealer.

The disc is not playable.

Under no circumstances should you repair the unit

Noisy or distorted

The unit is connected to a recording device directly and the copyguard

yourself as this will invalidate the guarantee!

picture

function is activated.

The disc is dirty.

It is in rapid advance or reverse playback, or in frame advance playback.

Abnormal picture or no

The resolution is not set correctly for video signals to be output from the

picture

COMPONENT and the HDMI OUTs.

The TV does not support HDCP.

The TV System of this unit does not match either your TV or the disc.

Slight pause of picture

A layer transition occurs during playback of DVD Videos, etc. in dual-

layer format.

No sound

The audio cords are disconnected.

The speakers are disconnected to the amplifier.

The incorrect selection of input source on the amplifier.

Noisy or distorted sound

The disc is dirty.

Poor connections.

BD-LIVE contents

Poor connections between this unit and broadband router and/or

cannot be loaded

modem.

The USB memory device is disconnected.

The BD-Live Internet Access is set to 'Prohibit Access'.

The BD disc does not support BD-LIVE.

The network settings are not set correctly.

Remote control unit does

Batteries are not loaded or exhausted.

not operate.

The remote sensor is obstructed.

Remedy

Connect cord securely.

Check the outlet using a lamp or another appliance.

Reload the disc with the printed side up.

Use a playable disc.

Clean the disc.

Load a disc that is correctly finalized.

Set the parental level setting correctly: see page E-18.

Adjust the setting correctly.

Press the POWER switch to switch the power off, press the

POWER switch again and then unload the disc.

Connect the cords correctly.

Select the input source correctly.

Use a playable disc.

Connect the unit so that the picture signal is

transferred directly to the TV.

Clean the disc.

Sometimes a small amount of picture distortion may

appear. This is not a malfunction.

Set the resolution correctly: see page E-16.

This unit will not transfer the video signals via the HDMI

connector to TV that does not support HDCP. This is not a

malfunction.

Set the TV type correctly: see page E-16.

Sometimes a slight pause may occur. This is not a

malfunction.

Connect the cords correctly.

Connect the speakers correctly.

Select the input source correctly.

Clean the disc.

Check the connections and connect all cords securely.

Connect the USB memory device to this unit.

Set it to 'Always Allow Access': see page E-17.)

Load a disc that supports BD-LIVE.

Set the network settings correctly: see page E-17.

Replace the batteries.

Remove the obstacle.

E-19