Epson 220 Manuale - Pagina 17

Sfoglia online o scarica il pdf Manuale per Stampante Epson 220. Epson 220 29. Epson printer parts manual

Stampa la pagina

Removing the printed document from the rear

push tractor

To remove the printed document, follow these steps:

1. Make sure the

Tear Off/Bin

indicates your paper is at the current tear-off position.) You

may need to press the

Tear Off/Bin

paper to the tear-off position.

2. Open the paper guide cover, and tear off the printed

document using the tear-off edge of the printer.

Note:

If the paper perforation is not properly aligned with the tear-off

edge, you can adjust the tear-off position using the micro adjust

feature. For more information, see "Adjusting the tear-off

position" on page 23.

Caution:

Never use the knob to adjust the tear-off position while

the printer is turned on; this may damage the printer or

cause it to lose the tear-off position. The knob can be

used when the printer is turned off only.

3. Close the paper guide cover.

4. To remove the remaining paper from the printer, press the

button to feed the paper backward to the

Load/Eject

standby position. Then open the sprocket covers of the

tractor and remove the paper.

When you resume printing, the printer automatically feeds the

paper back to the top-of-form position and starts printing.

Caution:

Always tear off your printed document before you press

the Load/Eject button. Reverse feeding several pages at

a time may cause a paper jam.

lights are flashing. (This

button to advance the

Using the Tractor in the Pull Position

Using the tractor in the pull position is ideal for printing on

thick and heavy continuous paper, such as multipart forms or

continuous paper with labels. However, you cannot use the

tear-off feature with the pull tractor.

When the pull tractor is installed, you can load paper from the

rear slot. However, this paper path is not recommend with

thick paper because it requires a straight paper path; the path

from the rear slot is curved. To avoid paper jams, it is best to

load paper in the front or bottom slot.

Caution:

Do not load continuous paper with labels in the rear

paper slot; the labels may come off their backing sheet

inside the printer and cause a paper jam.

Installing the tractor in the pull position

To install a tractor in the pull position, you must install the

optional pull tractor (C80032 ). To remove the front push

tractor, see "Removing the front push tractor" on page 15.

Note:

The tractor is installed in the rear push position only when the printer

is shipped. The rear push tractor cannot be removed.

To install a tractor in the pull position, follow these steps:

1. Make sure the printer is turned off. Lift the printer cover up

and off the printer.

2. Push up the tabs on each side of the paper tension unit and

lift the unit up and off the printer. Store the paper tension

unit in a safe place.

2/99

EPSON LQ-2080

- 17