Axxess RFASWC Manuale di istruzioni per l'installazione - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Elettronica per autoveicoli Axxess RFASWC. Axxess RFASWC 12. Wireless swc universal add-on
Anche per Axxess RFASWC: Manuale di istruzioni per l'installazione (12 pagine)
Stampa la pagina
Remapping the SWC Buttons
Button Assignment Legend
1. Volume Up
2. Volume Down
3. Seek Up/Next
4. Seek Down/Previous
5. Mode/Source
6. Mute
7. Preset Up
8. Preset Down
9. Power
* Only the following Pioneer models have the capability of retaining "Push
to Talk" on the radio: AVIC-Z110BT, AVIC-Z120BT, AVIC-Z130BT, AVIC-Z140BT,
AVIC-X920BT, AVIC-X930BT, and AVIC-X940BT.
* Update: Some newer radios use this command to activate Android/Apple voice
commands. Contact your radio vendor to see if your radios is applicable for this
new feature.
Note: Not all radios will have all of these commands. Please refer to the radio
owner's manual or contact the radio vendor directly for specific commands
recognized by that particular radio.
RFASWC Installation
10. Band
11. Play/Enter
12. PTT (Push to Talk)*
13. On-Hook
14. Off-Hook
15. Fan Up
16. Fan Down
17. Temp Up
18. Temp Down
Changing Radio Type
1) Refer to the Radio Legend to know which radio number you would like
to have programmed.
2) After 3 seconds of turning the key on, press and hold Volume Down on the
RFASWC until the LED on the RFASWC interface goes solid.
3) Release Volume Down and the LED will go off, indicating that you are in the
Changing Radio Type mode.
4) Press and hold Volume Up until the LED goes solid, then release. Repeat this
step for the desired radio number you have selected.
5) Once the desired radio number has been selected, press and release Volume
Down on the RFASWC; the LED will then go solid. The LED will remain on for
approximately 3 seconds while it stores the new radio information.
6) Once the LED goes off the Changing Radio Type mode will end. You can now
test the RFASWC.
Note: If at any time the user fails to press any button for a period longer than
10 seconds this process will abort.
6