Axxess RFASWC 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Axxess RFASWC에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess RFASWC 12 페이지. Wireless swc universal add-on
Axxess RFASWC에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)

페이지 인쇄

Remapping the SWC Buttons

Button Assignment Legend

1. Volume Up

2. Volume Down

3. Seek Up/Next

4. Seek Down/Previous

5. Mode/Source

6. Mute

7. Preset Up

8. Preset Down

9. Power

* Only the following Pioneer models have the capability of retaining "Push

to Talk" on the radio: AVIC-Z110BT, AVIC-Z120BT, AVIC-Z130BT, AVIC-Z140BT,

AVIC-X920BT, AVIC-X930BT, and AVIC-X940BT.

* Update: Some newer radios use this command to activate Android/Apple voice

commands. Contact your radio vendor to see if your radios is applicable for this

new feature.

Note: Not all radios will have all of these commands. Please refer to the radio

owner's manual or contact the radio vendor directly for specific commands

recognized by that particular radio.

RFASWC Installation

10. Band

11. Play/Enter

12. PTT (Push to Talk)*

13. On-Hook

14. Off-Hook

15. Fan Up

16. Fan Down

17. Temp Up

18. Temp Down

Changing Radio Type

1) Refer to the Radio Legend to know which radio number you would like

to have programmed.

2) After 3 seconds of turning the key on, press and hold Volume Down on the

RFASWC until the LED on the RFASWC interface goes solid.

3) Release Volume Down and the LED will go off, indicating that you are in the

Changing Radio Type mode.

4) Press and hold Volume Up until the LED goes solid, then release. Repeat this

step for the desired radio number you have selected.

5) Once the desired radio number has been selected, press and release Volume

Down on the RFASWC; the LED will then go solid. The LED will remain on for

approximately 3 seconds while it stores the new radio information.

6) Once the LED goes off the Changing Radio Type mode will end. You can now

test the RFASWC.

Note: If at any time the user fails to press any button for a period longer than

10 seconds this process will abort.