CREE LIGHTING SmartCast Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di illuminazione CREE LIGHTING SmartCast. CREE LIGHTING SmartCast 8. Dynamic skylight
Anche per CREE LIGHTING SmartCast: Manuale di avvio rapido (20 pagine)

Stampa la pagina

devices."

Rediscover Devices

won't find missing

device(s).

Note: Choosing "Go to Main Menu" should only be selected as a last resort. If a device is in-network, was simply

Note:

not discovered and this option was selected, Add Device can assign duplicate addresses. This can lead to

unpredictable system behavior.

® ®

Problem: SmartCast Technology Configuration Tool displays a warning that it cannot discover all network

Problem: SmartCast

Technology Configuration Tool displays a warning that it cannot discover all network

devices.

Discover Network

Devices reports

missing devices.

Note: If the Configuration Tool reports missing devices, "Go to Main Menu" should only be selected after

Note:

attempting to correct the issue using the above methods. If the device is communicating in the network but not

discovered by the Configuration Tool, continuing to the Main Menu may allow for duplicate device addresses

which may cause unpredictable system behavior.

VERIFYING ONEBUTTON™ SETUP

At the conclusion of OneButton™ Setup, spaces should be tested for proper grouping and operation. To perform

verification of the new SmartCast Technology installation, follow these steps:

Confirm proper grouping:

Group

Definition

Type

A group of fixtures that

Switch

are controlled by one or

more switches.

Configuration Tool needs to be centrally

located.

Device is non-responsive.

Configuration Tool is not located such

that it can communicate with all devices.

Missing device is not responding.

Check

With the system in normal mode

(Configuration Tool off or on

main menu), use the

on/off/raise/lower paddles on

wall switch to determine if all

desired fixtures are controlled.

Relocate to center of network and choose

"Rediscover Devices."

Look for non-powered devices.

Move Configuration Tool so it is centrally

located within devices on the network.

Select "Rediscover Devices."

Verify missing device has power. If the

missing device is a luminaire, verify that

the SmartCast Technology Control

Module is powered and its Status LED

illuminates.

Tips

If the fixtures are being dimmed

due to daylight harvesting, they

may not be able to be raised, but

will be able to be turned off and

on.