CREE LIGHTING Energy Uno Istruzioni per lo smontaggio - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per lo smontaggio per Lanterna CREE LIGHTING Energy Uno. CREE LIGHTING Energy Uno 3. Street lights

Disassembly Instructions

Power supply (PS)

For End User (EU)

For Control Authority (CA)

N° DOC: DI133RLER0

Rev: 00

PS-EU

a.Access the wiring compartment by unscrewing the two screws 3

on the appliance door

b.Secure the door with the appropriate support rod 4

c.Disconnect the cables connected to the disconnector 5 by loose-

ning the terminals with a screwdriver

d.Disconnect the remaining cables connected to the luminaire

body if present (NEMA, Zhaga, pink driver cable)

e.Remove the wiring plate by pressing the tab 6 downwards

f. Insert the new plate under the two joints 7 and press the tab 6

upwards

g.Reconnect the cables to the disconnector 5

h.Reconnect the cables disconnected at point "d" (see attached

wiring diagrams)

i. Lower the support rod 4 while keeping the door raised

j. Close the door and tighten the two screws 3 of the door to a

torque of 2 Nm

PS-CA

A.Open the wiring compartment by unscrewing the two 3 screws

on the appliance door

B.Secure the door with the appropriate support rod 4

C.Disconnect the cables connected to the driver on your terminal

block 8 with a screwdriver

D.Hold the driver still and unscrew the fixing screws 9

E.Extract the driver

Latest Release Date: 19/02/2021