CREE LIGHTING Energy Uno Инструкции по разборке - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по разборке для Фонарь CREE LIGHTING Energy Uno. CREE LIGHTING Energy Uno 3 страницы. Street lights

Disassembly Instructions

Power supply (PS)

For End User (EU)

For Control Authority (CA)

N° DOC: DI133RLER0

Rev: 00

PS-EU

a.Access the wiring compartment by unscrewing the two screws 3

on the appliance door

b.Secure the door with the appropriate support rod 4

c.Disconnect the cables connected to the disconnector 5 by loose-

ning the terminals with a screwdriver

d.Disconnect the remaining cables connected to the luminaire

body if present (NEMA, Zhaga, pink driver cable)

e.Remove the wiring plate by pressing the tab 6 downwards

f. Insert the new plate under the two joints 7 and press the tab 6

upwards

g.Reconnect the cables to the disconnector 5

h.Reconnect the cables disconnected at point "d" (see attached

wiring diagrams)

i. Lower the support rod 4 while keeping the door raised

j. Close the door and tighten the two screws 3 of the door to a

torque of 2 Nm

PS-CA

A.Open the wiring compartment by unscrewing the two 3 screws

on the appliance door

B.Secure the door with the appropriate support rod 4

C.Disconnect the cables connected to the driver on your terminal

block 8 with a screwdriver

D.Hold the driver still and unscrew the fixing screws 9

E.Extract the driver

Latest Release Date: 19/02/2021