Creek Audio EVOLUTION 50A Manuale di istruzioni - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per Amplificatore Creek Audio EVOLUTION 50A. Creek Audio EVOLUTION 50A 13. Integrated amplifier
Anche per Creek Audio EVOLUTION 50A: Istruzioni per l'utente (8 pagine), Manuale di istruzioni (17 pagine)
Stampa la pagina
As with Line 3 it is possible to input the signal directly to the power amp, bypassing the
internal pre-amplifier. This feature, called "Line 4 Direct", is intended for sources whose
output is already influenced by another volume control, such as the EVOLUTION 50D
DAC and CD player.
Pre-out is an output signal replicating the feed to the internal power amplifier section. It is
affected by all the controls of the amplifier such as volume, tone etc. It allows the user to
drive another power amp if required. This can be used to "bi-amplify" a suitably equipped
pair of loudspeakers or to connect an active sub-woofer for example.
CONFIGURING THE INPUTS
To access the input configuration menu the product must be switched off. Hold down the
MENU key whilst turning on the power and release once you see the "Setup Menu" ap-
pear. Here you will see the options for input configuration and restoring factory defaults.
The tree looks like this:
Line 3 Options –
Line Level Input
Power Amp Input
Line 4 Options –
Line Level Input
Power Amp Input
Factory Defaults
Navigate using the left-hand rotary control; pressing the control selects the option. Once
configured press the MENU key again and the product will start up with the new settings.
Page: 3
Default setting. The input is conventional.
This bypasses the internal pre-amp giving "AV Direct" mode.
Default setting. The input is conventional.
This bypasses the internal pre-amp giving "Line 4 Direct" mode.
Restores all settings to original factory states.