Digigram EtherSound Aqonda 8 Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale Digigram EtherSound Aqonda 8. Digigram EtherSound Aqonda 8 20. Ethersound audio bridges
Stampa la paginaAQONDA 8 and AQONDA 16 back panels
Power supply
1. <}100{>
Power plug MUST be earthed properly.
Ground
2.
Connect this ground bolt to the chassis of the mounting rack for a better grounding of the electronics,
thus ensuring immunity to electromagnetic interference.
Network connectors
3.
These three Neutrik
EtherSound network. The IN port receives the descending EtherSound stream (downstream) and transmits
the ascending EtherSound stream (upstream), while the OUT port receives the ascending EtherSound
stream (upstream) and transmits the descending EtherSound stream (downstream). For more details on the
concepts of "upstream" and "downstream", please refer to the document "EtherSound Overview". Thz
"DATA/CONTROL" port allows device management and control of your network through an EtherSound
network software such as EScontrol or ESmonitor.
4. Word Clock
A Word Clock input and a Word Clock output allow for external synchronization. The Word Clock input
can only be used with signals of a frequency close to 44.1 or 48 kHz.
Audio connectors
5.
On AQONDA 16, a female Sub-D 25 connector is available to restore outputs 9 to 16 (analog, line level).
8
TM
TM
EtherCon
RJ45 connectors allow of a steady and reliable connection to the