Digigram EtherSound Aqonda 8 사용자 설명서 - 페이지 9

{카테고리_이름} Digigram EtherSound Aqonda 8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digigram EtherSound Aqonda 8 20 페이지. Ethersound audio bridges

AQONDA 8 and AQONDA 16 back panels

Power supply

1. <}100{>

Power plug MUST be earthed properly.

Ground

Connect this ground bolt to the chassis of the mounting rack for a better grounding of the electronics,

thus ensuring immunity to electromagnetic interference.

Network connectors

These three Neutrik

EtherSound network. The IN port receives the descending EtherSound stream (downstream) and transmits

the ascending EtherSound stream (upstream), while the OUT port receives the ascending EtherSound

stream (upstream) and transmits the descending EtherSound stream (downstream). For more details on the

concepts of "upstream" and "downstream", please refer to the document "EtherSound Overview". Thz

"DATA/CONTROL" port allows device management and control of your network through an EtherSound

network software such as EScontrol or ESmonitor.

4. Word Clock

A Word Clock input and a Word Clock output allow for external synchronization. The Word Clock input

can only be used with signals of a frequency close to 44.1 or 48 kHz.

Audio connectors

On AQONDA 16, a female Sub-D 25 connector is available to restore outputs 9 to 16 (analog, line level).

EtherCon

RJ45 connectors allow of a steady and reliable connection to the