Accuris SmartDoc 2.0 Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di laboratorio Accuris SmartDoc 2.0. Accuris SmartDoc 2.0 8. Imaging enclosure
Anche per Accuris SmartDoc 2.0: Manuale di istruzioni (8 pagine), Filtro e manuale d'uso (1 pagine)

Stampa la pagina

Note: The SmartDoc uses a timing circuit, and the lights will automatically turn

off after 5 minutes. This timer prevents excess heat from building up from the

powerful LED lights.

5. GEL VIEWING AND BAND CUTTING

The SmartDoc Illumination Base can be used with the orange filter cover for

visualizing stained nucleic acids Gel Viewing separated on agarose or acylamide

gels.

Orange filter cover placed for gel viewing

1. Set the gel preparation platform onto a level lab bench or table.

2. Glean the glass surface with alcohol or glass cleaner and allow to dry.

3. Carefully place a stained electrophoresis gel onto the square glass

surface using care to eliminate bubbles under the gel.

4. Note: The maximum sized gel to fit onto the glass surface is 15x15cm,

cut away any overhanging edges of the gel if required.

5. Place the blue illumination base over the gel preparation platform,

taking care that it nests correctly into place.

6. SMARTDOC PHOTO FILTERS

E5001-ORANGE

(included)

A photo filter is required to capture quality images with the SmartDoc 2.0 system.

The orange photo filter, part E5001-ORANGE, is included with the system. This

filter blocks the visible blue wavelengths coming from the illumination base or

Orange filter cover set at an angle for gel

access and band cutting

E5001-535

(optional)

E5001-590

(optional)