FIAMA F1X5 RS Manuale d'uso e manutenzione - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Hardware del computer FIAMA F1X5 RS. FIAMA F1X5 RS 12. Microprocessor display f1x5_rs with modbus rtu serial output rs232, rs485

Stampa la pagina

Display

Value which Corresponds to 1 Encoder Revolution

This instrument can correct the impulses, and multiply them by a coefficient, which corresponds to the ratio

between constant

visualize the value you need with a certain number of impulses (they are reckoned in the inputs). The

programmed value of this parameter represents the value visualized on the display.

The interval value of this count is programmable between 0 ÷ 999999.

Number of Impulses for every Encoder Revolution

The value, which should programmed in this section, represents the number of impulses for every encoder

revolution, this is to say the division factor of input impulses.

The interval of the allowed values is 0 ÷ 999999.

Example 1:

If you have a 100 impulse/rev. Encoder, and for every revolution you need to visualize 123,4567 pls. follow

the next description:

VISUAL

position too, pls. insert

: In order to reduce the approximation error we suggest you to multiply

1000 . With reference to the above mentioned values you will get :123.4567 x 100 =123456 and

=10000.

IMPULS

The value will be composed by 6 numerals (instead of 4) for every visualization.

Example 2:

If you have a proximity sensor, and after 10 impulses you need to see the value 7, pls. programme in the

following way:

=7 and

VISUAL

Decimal Numbers

This constant shows the decimal point position : programme 0 if you have not any decimal number, 1 for 1

decimal number, ecc... Accepted values: from 0 to 4.

Preset

This instrument allows you to programme a value which will be shown after pressing

activating the Reset input in the key-board according to the scheme M.Azz. "Zero setting" .

The allowed values are included between –999999 and 999999.

Zero setting

By means of the zero-setting programming you can select the function of the instrument after choosing the

digit or after starting the

RESET

ENTER

The Reset function zeros the visualized quote on the display, while the Preset shows the value, which has been

programmed in the constant

According to the following scheme, please choose your preferred type of zero setting :

Data: 13/01/16

and

. If you programme these two constants correctly the display will

=1234 and

=100 . If you need to input a decimal number in the second

IMPULS

=1.

DEC

=10.

IMPULS

in the terminal board.

RESET

before hand.

PRESET Input

Reset

Preset

Reset

Preset

Disabled Input

file: F1X5_RS_ing.doc

and

VISUAL

IMPULS

RESET

RESET/ENTER Digit

Disabled Digit

Reset

Preset

Reset

Preset

Reset

Preset

Disabled Digit

Delayed Reset (press for about 3 sec)

F1X5_RS

by 10 or 100 or

or after

ENTER

Pag 6/12