Cisco 2950 - Catalyst Switch Manuale - Pagina 10

Sfoglia online o scarica il pdf Manuale per Interruttore Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 19. Long-reach ethernet switches
Anche per Cisco 2950 - Catalyst Switch: Manuale di soluzione (17 pagine), Bollettino dei prodotti (3 pagine), Bollettino di assistenza prodotti (5 pagine), Manuale di migrazione (25 pagine), Bollettino di assistenza prodotti (6 pagine), Manuale introduttivo (29 pagine), Scheda tecnica (20 pagine)

Cisco 2950 - Catalyst Switch Manuale
Cisco - Connecting a Terminal to the Console Port on Catalyst Switches
number is CAB-S3-CONSOLE=.
Note: The auxiliary (AUX) port is not supported.
Figure: EIA/TIA-232 RJ-45 Adapter Cable Connector
Table E-1: Supervisor Engine III Console Port Pinouts RJ45-to-DB25 Adaptor Cable
RJ45 on Switch Console
(DTE) (Uses straight through
cable.)
1 RTS (looped to pin 8)
2 DTR
3 RxD
4 GND
5 GND tied to 4
6 TxD
7 DSR
8 CTS (looped to pin 1)
Table E-2: Supervisor Engine III Console Port Pinouts RJ45-to-DB9 Adaptor Cable
RJ45 on Switch Console (DTE)
(Uses straight through cable.)
1 RTS (looped to pin 8)
2 DTR
3 RxD
4 GND
5 GND tied to 4
6 TxD
7 DSR
8 CTS (looped to pin 1)

Configuring a Terminal for Attachment to the Console Port

Note: The console port is an asynchronous (Async) serial port; any device connected to this port must be
capable of asynchronous transmission.
http://www.cisco.com/warp/public/473/9.html (10 of 19) [9/4/2003 12:36:03 PM]
DB25 on Terminal (DTE)
6 DSR
2 TxD
7 GND
7 GND
3 RxD
20 DTR
DB9 on Terminal (DTE)
6 DSR
3 TxD
5 GND
5 GND
2 RxD
4 DTR