Cisco 2950 - Catalyst Switch 매뉴얼 - 페이지 10

{카테고리_이름} Cisco 2950 - Catalyst Switch에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2950 - Catalyst Switch 19 페이지. Long-reach ethernet switches
Cisco 2950 - Catalyst Switch에 대해서도 마찬가지입니다: 솔루션 매뉴얼 (17 페이지), 제품 게시판 (3 페이지), 제품 지원 게시판 (5 페이지), 마이그레이션 매뉴얼 (25 페이지), 제품 지원 게시판 (6 페이지), 시작하기 매뉴얼 (29 페이지), 데이터시트 (20 페이지)

Cisco 2950 - Catalyst Switch 매뉴얼
Cisco - Connecting a Terminal to the Console Port on Catalyst Switches
number is CAB-S3-CONSOLE=.
Note: The auxiliary (AUX) port is not supported.
Figure: EIA/TIA-232 RJ-45 Adapter Cable Connector
Table E-1: Supervisor Engine III Console Port Pinouts RJ45-to-DB25 Adaptor Cable
RJ45 on Switch Console
(DTE) (Uses straight through
cable.)
1 RTS (looped to pin 8)
2 DTR
3 RxD
4 GND
5 GND tied to 4
6 TxD
7 DSR
8 CTS (looped to pin 1)
Table E-2: Supervisor Engine III Console Port Pinouts RJ45-to-DB9 Adaptor Cable
RJ45 on Switch Console (DTE)
(Uses straight through cable.)
1 RTS (looped to pin 8)
2 DTR
3 RxD
4 GND
5 GND tied to 4
6 TxD
7 DSR
8 CTS (looped to pin 1)

Configuring a Terminal for Attachment to the Console Port

Note: The console port is an asynchronous (Async) serial port; any device connected to this port must be
capable of asynchronous transmission.
http://www.cisco.com/warp/public/473/9.html (10 of 19) [9/4/2003 12:36:03 PM]
DB25 on Terminal (DTE)
6 DSR
2 TxD
7 GND
7 GND
3 RxD
20 DTR
DB9 on Terminal (DTE)
6 DSR
3 TxD
5 GND
5 GND
2 RxD
4 DTR