Cisco ASR 920 series Come iniziare - Pagina 4

Sfoglia online o scarica il pdf Come iniziare per Interruttore Cisco ASR 920 series. Cisco ASR 920 series 6. Aggregation services router
Anche per Cisco ASR 920 series: Manuale di installazione (36 pagine), Manuale di installazione (42 pagine), Manuale di installazione dell'hardware (46 pagine), Manuale (36 pagine)

Stampa la pagina
Cisco ASR 920 series Come iniziare

Interface Naming

Interface Naming
The following table shows the interface naming of the Cisco ASR-920-12CZ-A/ASR-920-12CZ-D ports:
1G SFP
Only
1
0
1 Ports 12 and 13 when operating in 1G Mode will become operationally up only when the peer connecting interfaces are in Auto negotiation mode.
• Interfaces 0–3 are GigabitEthernet SFP only ports.
• Interfaces 4–11 GigabitEthernet are combo ports that support dual media—Copper and SFP. For more
• Interfaces 0 through 11 are referred to as GigabitEthernet 0/0/0–GigabitEthernet 0/0/11 respectively
• Interfaces 12 and 13 are dual rate ports. These ports support 1G or 10G mode depending on the optics
Note
Dual-Rate functionality is supported only with the Supported SFPs, listed in the Cisco ASR 920 Series
Aggregation Services Router Hardware Installation Guide .
• Interfaces 12 and 13 are TenGigibitEthernet 0/0/12–TenGigabitEthernet 0/0/13. The interface name
• Out of Band Management Network port is refereed as interface Gig0.
The following table shows the interface naming of the Cisco ASR920-4SZ-A/ASR920-4SZ-D ports:
1G Cu Port
1
0
2 Ports 2, 3, 4, and 5 when operating in 1G Mode will become operationally up only when the peer connecting interfaces are in Auto negotiation mode.
• Interfaces 0–1 are Copper only ports with RJ45 connector.
• Interfaces 0 and 1are referred to as GigabitEthernet 0/0/0–GigabitEthernet 0/0/1 respectively.
• Interfaces 2 through 5 are dual rate ports. These ports support 1G or 10G mode depending on the optics
Cisco ASR 920 Series Aggregation Services Router Configuration Guide
4
1G Combo Port
3
5
7
2
4
6
information, see the Configuring Auto Media Sense on Cisco ASR 920 Series Routers .
(SFP or SFP+ respectively) installed in these ports.
remains unchanged even if an SFP is installed in the port and the port is operating in 1G mode.
(SFP or SFP+ respectively) installed in these ports.
Getting Started With the Cisco ASR 920 Series Router
9
11
5
8
10
4
2
10G SFP+/1GSFP
3
2
7
9
11
6
8
10
5
4
10G
SFP+/1G
1
SFP
13
12