Cisco ASR 920 series Come iniziare - Pagina 5

Sfoglia online o scarica il pdf Come iniziare per Interruttore Cisco ASR 920 series. Cisco ASR 920 series 6. Aggregation services router
Anche per Cisco ASR 920 series: Manuale di installazione (36 pagine), Manuale di installazione (42 pagine), Manuale di installazione dell'hardware (46 pagine), Manuale (36 pagine)

Stampa la pagina
Cisco ASR 920 series Come iniziare
Getting Started With the Cisco ASR 920 Series Router
Dual-Rate functionality is supported only with the Supported SFPs, listed in the Cisco ASR 920 Series
Note
Aggregation Services Router Hardware Installation Guide .
• Interfaces 2 through 5 are named as TenGigibitEthernet 0/0/2–TenGigabitEthernet 0/0/5 respectively.
The interface name remains unchanged even if an SFP is installed in the port and the port is operating
in 1G mode.
• Out of Band Management Network port is referred as interface Gig0.
The following table shows the interface naming of the Cisco ASR-920-10SZ-PD ports:
1G Cu
1
0
• Interfaces 0–1 are Copper only ports with RJ45 connector.
• Interfaces 2-9 are GigabitEthernet SFP ports.
• Interfaces 10-11 are 10 GigabitEthernet SFP+ ports that support 10G mode.
The following table shows the interface naming of the Cisco ASR-920-24SZ-IM, Cisco ASR-920-24SZ-M,
ASR-920-24TZ-M ports:
IM Slots (for Cisco ASR-920-24SZ-IM only)
1G SFP/Cu
1
0
3 Ports 0 -23 are Copper ports for ASR-920-24TZ-M
• Interfaces 0–23 are GigabitEthernet SFP ports for ASR-920-24SZ-IM, ASR-920-24SZ-M and Copper
port for ASR-920-24TZ-M.
• Interfaces 24-27 are 10 GigabitEthernet SFP+ ports that support 10G mode.
The following table shows the interface naming of the Cisco ASR-920-12SZ-IM:
10G/1G SFP
—
15
1G SFP
-
-
-
2
3
4
3
3
5
7
2
4
6
1G SFP
—
14
13
12
11
Cisco ASR 920 Series Aggregation Services Router Configuration Guide
-
-
-
5
6
7
9
11
13
8
10
12
10
9
8
Interface Naming
10G SFP+
-
-
-
8
9
10
10G SFP+
15
17
19
14
16
18
1G Cu
7
5
3
6
4
2
-
11
21
20
1
0
5