Cisco ASR 920 series 시작하기 - 페이지 5
{카테고리_이름} Cisco ASR 920 series에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 920 series 6 페이지. Aggregation services router
Cisco ASR 920 series에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지), 설치 매뉴얼 (42 페이지), 하드웨어 설치 매뉴얼 (46 페이지), 매뉴얼 (36 페이지)
페이지 인쇄
Getting Started With the Cisco ASR 920 Series Router
Dual-Rate functionality is supported only with the Supported SFPs, listed in the Cisco ASR 920 Series
Note
Aggregation Services Router Hardware Installation Guide .
• Interfaces 2 through 5 are named as TenGigibitEthernet 0/0/2–TenGigabitEthernet 0/0/5 respectively.
The interface name remains unchanged even if an SFP is installed in the port and the port is operating
in 1G mode.
• Out of Band Management Network port is referred as interface Gig0.
The following table shows the interface naming of the Cisco ASR-920-10SZ-PD ports:
1G Cu
1
0
• Interfaces 0–1 are Copper only ports with RJ45 connector.
• Interfaces 2-9 are GigabitEthernet SFP ports.
• Interfaces 10-11 are 10 GigabitEthernet SFP+ ports that support 10G mode.
The following table shows the interface naming of the Cisco ASR-920-24SZ-IM, Cisco ASR-920-24SZ-M,
ASR-920-24TZ-M ports:
IM Slots (for Cisco ASR-920-24SZ-IM only)
1G SFP/Cu
1
0
3 Ports 0 -23 are Copper ports for ASR-920-24TZ-M
• Interfaces 0–23 are GigabitEthernet SFP ports for ASR-920-24SZ-IM, ASR-920-24SZ-M and Copper
port for ASR-920-24TZ-M.
• Interfaces 24-27 are 10 GigabitEthernet SFP+ ports that support 10G mode.
The following table shows the interface naming of the Cisco ASR-920-12SZ-IM:
10G/1G SFP
—
15
1G SFP
-
-
-
2
3
4
3
3
5
7
2
4
6
1G SFP
—
14
13
12
11
Cisco ASR 920 Series Aggregation Services Router Configuration Guide
-
-
-
5
6
7
9
11
13
8
10
12
10
9
8
Interface Naming
10G SFP+
-
-
-
8
9
10
10G SFP+
15
17
19
14
16
18
1G Cu
7
5
3
6
4
2
-
11
21
20
1
0
5