Cisco ASR 920 series Manuale di installazione - Pagina 22

Sfoglia online o scarica il pdf Manuale di installazione per Interruttore Cisco ASR 920 series. Cisco ASR 920 series 42. Aggregation services router
Anche per Cisco ASR 920 series: Manuale di installazione (36 pagine), Come iniziare (6 pagine), Manuale di installazione dell'hardware (46 pagine), Manuale (36 pagine)

Remove SFP Modules

SUMMARY STEPS

1. Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.

2. Disconnect the cable from the SFP module, and insert a dust plug into the cable end.

3. Unlock and remove the SFP module, as shown in the following figure.

4. Grasp the SFP module between your thumb and index finger, and carefully remove it from the module

slot.

5. For fiber-optic SFP modules, insert a dust plug into the optical ports of the SFP module to keep the optical

interfaces clean.

6. Place the removed SFP module in an antistatic bag or other protective environment.

DETAILED STEPS

Step 1

Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.

Step 2

Disconnect the cable from the SFP module, and insert a dust plug into the cable end.

For reattachment, note which cable connector plug is send (TX) and which is receive (RX).

Tip

Step 3

Unlock and remove the SFP module, as shown in the following figure.

Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide

Installing the Cisco ASR 920 Series Router