Cisco ASR 920 series Kurulum Kılavuzu - Sayfa 22

Anahtar Cisco ASR 920 series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco ASR 920 series 42 sayfaları. Aggregation services router
Ayrıca Cisco ASR 920 series için: Kurulum Kılavuzu (36 sayfalar), Başlarken (6 sayfalar), Donanım Kurulum Kılavuzu (46 sayfalar), Manuel (36 sayfalar)

Sayfayı Yazdır

1. Connect to the 10/100/1000 Ports

Remove SFP Modules

SUMMARY STEPS

1. Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.

2. Disconnect the cable from the SFP module, and insert a dust plug into the cable end.

3. Unlock and remove the SFP module, as shown in the following figure.

4. Grasp the SFP module between your thumb and index finger, and carefully remove it from the module

slot.

5. For fiber-optic SFP modules, insert a dust plug into the optical ports of the SFP module to keep the optical

interfaces clean.

6. Place the removed SFP module in an antistatic bag or other protective environment.

DETAILED STEPS

Step 1

Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.

Step 2

Disconnect the cable from the SFP module, and insert a dust plug into the cable end.

For reattachment, note which cable connector plug is send (TX) and which is receive (RX).

Tip

Step 3

Unlock and remove the SFP module, as shown in the following figure.

Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide

Installing the Cisco ASR 920 Series Router