Cisco ASR 920 series Manuale di installazione - Pagina 8

Sfoglia online o scarica il pdf Manuale di installazione per Interruttore Cisco ASR 920 series. Cisco ASR 920 series 42. Aggregation services router
Anche per Cisco ASR 920 series: Manuale di installazione (36 pagine), Come iniziare (6 pagine), Manuale di installazione dell'hardware (46 pagine), Manuale (36 pagine)

Attaching the Cable Guides

The following figure shows how to install the Cisco ASR 920 Series Router in a 19-inch EIA rack.

Figure 5: Installing the Chassis in a 19-inch EIA Rack

Step 3

Install the four M6x12mm zinc-plated steel screws through the holes in the bracket and into the threaded holes in the

equipment rack posts.

Step 4

Use a tape measure and level to verify that the chassis is installed straight and level.

Attaching the Cable Guides

The Cisco ASR 920 Series Router supports the following cable guides:

• A920-CBL-GUIDE (left and right)—help in routing the cables from all components on the front panel

Note

If the chassis is mounted using 19-inch brackets, you must assemble the cable guides before installing the

chassis on the rack.

To install the cable guides, perform these steps:

Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide

thereby enabling a proper cable-bending radius.

Installing the Cisco ASR 920 Series Router