Cisco Business 250 Series Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Interruttore Cisco Business 250 Series. Cisco Business 250 Series 17. Smart switches
Anche per Cisco Business 250 Series: Manuale di avvio rapido (2 pagine), Manuali di avvio rapido (5 pagine), Conoscere (10 pagine), Conoscere (16 pagine), Manuale di avvio rapido (5 pagine), Manuale di avvio rapido (49 pagine)

• Computer with Internet Explorer (version 9.0, 10.0, 11.0), or Firefox

(version 36.0, 37.0, or higher), or Chrome (version 40,41,42 or higher) for

using the web-based interface.

Mounting the Cisco 250 Series Smart

Switches

There are three ways to install the switch:

• Place the switch on a flat surface. To place the switch on a desktop,

install the four rubber feet (included) on the bottom of the switch.

• Mount the switch in a standard rack (1 rack unit high).

• Mount on a wall.

Placement Tips

Do not mount the device in a location where any of the following conditions

exist:

• High Ambient Temperature—To prevent the switch from overheating,

do not operate it in an area that exceeds an ambient temperature of

122°F (50°C).

• Air Flow—Both side panels must be unobstructed to prevent

overheating.

• Overloading—The device must be level, stable, and secure to prevent

it from sliding or shifting out-of-position.

• Circuit Overloading—Adding the device to the power outlet must not

overload that circuit.

You can mount the switches in any standard size, 19-inch (about 48 cm)

wide rack. The switch requires 1 rack unit (RU) of space, which is 1.75

inches (44.45 mm) high.

For stability, load the rack from the bottom to the top, with the

AUTION

heaviest devices on the bottom. A top-heavy rack is likely to

be unstable and might tip over.

Cisco 250 Series Smart Switches