Cisco Catalyst 2955 Series Note sull'installazione - Pagina 2

Sfoglia online o scarica il pdf Note sull'installazione per Interruttore Cisco Catalyst 2955 Series. Cisco Catalyst 2955 Series 12. Ios software release 12.1(14)ea1
Anche per Cisco Catalyst 2955 Series: Bollettino dei prodotti (3 pagine), Manuale di risoluzione dei problemi (6 pagine), Bollettino di assistenza prodotti (6 pagine)

Stampa la pagina

Overview

Overview
The rear panel of the Catalyst 2955 switch has a DIN rail mounting clip assembly, as shown in
Figure 1
1
1
2

Mounting the Switch on a DIN Rail

You can mount the Catalyst 2955 switch on a DIN rail in a parallel or a face-down configuration.
The switch ships with the DIN rail clip assembly installed on the rear panel, for a parallel mounting
configuration. To mount the switch in a face-down configuration, unscrew the four DIN rail clip
mounting screws from the rear panel, and then reuse the screws to install the clip on the top of the switch,
as shown in
Catalyst 2955 Switch DIN Rail Clip Installation Notes
2
DIN Rail Clip Parallel Mounting Configuration
3
Catalyst 2955 switch rear panel
DIN rail clip assembly
Figure
2.
2
3
DIN rail clip mounting screws
Figure
1.
OL-5262-01