Cisco Catalyst 2955 Series Installatie-opmerkingen - Pagina 2

Blader online of download pdf Installatie-opmerkingen voor {categorie_naam} Cisco Catalyst 2955 Series. Cisco Catalyst 2955 Series 12 pagina's. Ios software release 12.1(14)ea1
Ook voor Cisco Catalyst 2955 Series: Product Bulletin (3 pagina's), Handleiding voor probleemoplossing (6 pagina's), Product ondersteunings bulletin (6 pagina's)

Pagina afdrukken

Overview

Overview
The rear panel of the Catalyst 2955 switch has a DIN rail mounting clip assembly, as shown in
Figure 1
1
1
2

Mounting the Switch on a DIN Rail

You can mount the Catalyst 2955 switch on a DIN rail in a parallel or a face-down configuration.
The switch ships with the DIN rail clip assembly installed on the rear panel, for a parallel mounting
configuration. To mount the switch in a face-down configuration, unscrew the four DIN rail clip
mounting screws from the rear panel, and then reuse the screws to install the clip on the top of the switch,
as shown in
Catalyst 2955 Switch DIN Rail Clip Installation Notes
2
DIN Rail Clip Parallel Mounting Configuration
3
Catalyst 2955 switch rear panel
DIN rail clip assembly
Figure
2.
2
3
DIN rail clip mounting screws
Figure
1.
OL-5262-01