DIGISYNTHETIC K7 Manuale d'uso del prodotto - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso del prodotto per Hardware del computer DIGISYNTHETIC K7. DIGISYNTHETIC K7 13. Dsp karaoke processor
Stampa la pagina(2) Subwoofer output equalizer (7 bands):
Type: PEQ/ Low-shelf / High-shelf
Frequency:
Gain:
Bandwidth:
(3) Low-cut and High-cut filters of subwoofer output:
Frequency of Low-cut filter: 19.7Hz – 1000Hz
Frequency of High-cut filter: 35.1Hz – 2000Hz
Roll-off of filters:
Type of filters: Bessel, Butterworth, Linkwitz-Riley
(4) Volume of subwoofer output matrixes:
Volume of music:
Volume of direct sound: Mute, or -30dB to 0dB, step 0.5dB
(5) Phase inverter of subwoofer output: 0°/ 180°
(6) Delay of center output:
On / Off,
0.0mS to 21mS, step 0.1mS
(7) Compressor of subwoofer output:
Off / Hard-knee / Soft-knee typeⅠ / Soft-knee type Ⅱ /
Soft-knee type Ⅲ / Soft-knee type Ⅳ / Soft-knee type Ⅴ
Threshold: -20dBu to 14.3dBu, step 0.5dBu
Ratio: 1:1 to 16:1, step 2:1
Surround
output
Menu
1 . Switch to a different page of the surround menu by continuous
press [Surround].
2 . Rotary knob [MUS VOL/EDIT] adjust the parameters, some
parameters can be rough adjusted by rotating the knob [EFF
VOL/Par. Coarse]
3 . Key[ ]and[ ] switch with a page of the cursor position, adjust
other parameters (or with knob [MIC VOL/Cursor] for quickly
adjusted the cursor position).
4, the surrounding parameters are as follows:
(1) surround (left / right) volume:
Mute, -30dB~+6dB, step 0.5dB
(2) 7 bands PEQ(left / right):
Type:
PEQ/ Low-shelf / High-shelf
Frequency:
19.7Hz~20200Hz
Gain:
-15dB~+12dB, step 0.1dB
Bandwidth:
0.011~3.595
(3) High/low cut (left / right) :
Low cut frequency: 19.7 ~202Hz Hz
High frequency:
12100Hz~20200Hz
Roll-off of filters:
12dB, 18dB, 24dB, 36dB
Type of filters: Bessel, Butterworth, Linkwitz-Riley
(4) surround (left / right) matrix volume:
Music:
Mute, -30dB~0dB, step 0.5dB
Direct sound: Mute, -30dB~0dB, step 0.5dB
Echo:
Mute, -30dB~0dB, step 0.5dB
Reverberation: Mute, -30dB~0dB, step 0.5dB
(5) surround (left / right) phase:
0 / 180
(6) surround (left / right) delay:
On / off
0.0mS~21mS, step 0.1mS
(7) surround (left / right) compressor:
Off / Hard-knee / Soft-knee typeⅠ / Soft-knee type Ⅱ /
Soft-knee type Ⅲ / Soft-knee type Ⅳ / Soft-knee type Ⅴ
Threshold: -20dBu to 14.3dBu, step 0.5dBu
Ratio: 1:1 to 16:1, step 2:1
(8) surround link:
Yes / no
Setting menu
1 . Switch to a different page of the setting menu by continuous
press [Setting].
2 . Rotary knob [MUS VOL/EDIT] adjust the parameters, some
parameters can be rough adjusted by rotating the knob [EFF
VOL/Par. Coarse]
3 . Key[ ]and[ ] switch with a page of the cursor position, adjust
other parameters (or with knob [MIC VOL/Cursor] for quickly
adjusted the cursor position).
4. Setting parameters as follows:
(1) Initialized mode:
Auto save or User preset 1-3
(2) Limits of maximum volume:
Music:
Mute, or -30dB to +12dB, step 0.5dB
Microphone: Mute, or -30dB to +12dB, step 0.5dB
Effect:
Mute, or -30dB to +6dB, step 0.5dB
19.7Hz to 20200Hz
-15dB to +12dB, step 0.1dB
0.011 to 3.595
12dB, 18dB, 24dB, 36dB
Mute, or -30dB to 0dB, step 0.5dB
Main output:
Mute, or -30dB to +6dB, step 0.5dB
Center output:
Mute, or -30dB to +6dB, step 0.5dB
Subwoofer output: Mute, or -30dB to +10dB, step 0.5dB
(3) Limits of Gain of equalizer:
Music:
+6.0dB to +12.0dB, step 0.1dB
Microphone:
+6.0dB to +12.0dB, step 0.1dB
Effect:
+6.0dB to +12.0dB, step 0.1dB
Main output:
+6.0dB to +12.0dB, step 0.1dB
Center output:
+6.0dB to +12.0dB, step 0.1dB
Subwoofer output: +6.0dB to +12.0dB, step 0.1dB
(4) Automatic recovery of music pitch:
On / Off
Threshold: -30dB to 0dB, step 0.5dB
Time: 0 to 60S
(5) Sing and to disco mode switch:
Auto / Sing / Disco
Threshold: -30dB to 0dB, step 0.5dB
Time: 0 to 60S
Preset storage / recall
1. Preset storage
(1) Press Key [STO/RCL] to store Preset, then a confirmation
dialog appears, as shown below:
Save to
User preset 1? "Empty"
(2) Twist the knob [EDIT] to select the sequence number of
stack to be stored, the follow character indicates the status
of stack,"Used" or "Empty".
(3) Press key [STO/RCL] to confirm, there will be two
situations:
If the status of stack is "Empty", then will store directly to
finish the steps, Else if the status of stack is "Used", a
confirmation dialog will appears again, as shown below:
Cover user preset 1 ?
" " : No
(4) Press key [
] to cancel, key [
2. Preset recall
There are two ways to recall the user preset,
Ways1: Press keys [1],[2],[3] to recall the program 1-3 quickly
and directly.
Ways2:To recall more other user presets, the steps as follows:
(1) Press and hold the Key [STO/RCL], to enter the program
recalling process, a dialog as follows,
Recall
user preset 1 ? "used"
(2) Twist knob [EDIT] to select the sequence number of stack
to be recalled, the follow character indicates the status of
stack, "Used" or "Empty".
(3) Press key [STO/RCL] again to confirm the sequence
number, tip recalling failed and exit the recalling process if
the stack is "Empty". Otherwise forward to the final
confirmation if the stack is "Used", dialog as shown below.
Recall user preset 1 ?
" " : No
(4) Press key [ ] to cancel, key [ ] to confirm.
Initialized mode selection
Options [Initial] of the menu [Setting], to configure the initialized
mode, there are four options, Auto save and user presets 1-3.
1
"
": Yes
] to confirm.
1
"
": Yes
5