DIGISYNTHETIC K7 제품 사용 설명서 - 페이지 7

{카테고리_이름} DIGISYNTHETIC K7에 대한 제품 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGISYNTHETIC K7 13 페이지. Dsp karaoke processor

페이지 인쇄

1. Product Use Guide

(2) Subwoofer output equalizer (7 bands):

Type: PEQ/ Low-shelf / High-shelf

Frequency:

Gain:

Bandwidth:

(3) Low-cut and High-cut filters of subwoofer output:

Frequency of Low-cut filter: 19.7Hz – 1000Hz

Frequency of High-cut filter: 35.1Hz – 2000Hz

Roll-off of filters:

Type of filters: Bessel, Butterworth, Linkwitz-Riley

(4) Volume of subwoofer output matrixes:

Volume of music:

Volume of direct sound: Mute, or -30dB to 0dB, step 0.5dB

(5) Phase inverter of subwoofer output: 0°/ 180°

(6) Delay of center output:

On / Off,

0.0mS to 21mS, step 0.1mS

(7) Compressor of subwoofer output:

Off / Hard-knee / Soft-knee typeⅠ / Soft-knee type Ⅱ /

Soft-knee type Ⅲ / Soft-knee type Ⅳ / Soft-knee type Ⅴ

Threshold: -20dBu to 14.3dBu, step 0.5dBu

Ratio: 1:1 to 16:1, step 2:1

Surround

output

1 . Switch to a different page of the surround menu by continuous

press [Surround].

2 . Rotary knob [MUS VOL/EDIT] adjust the parameters, some

parameters can be rough adjusted by rotating the knob [EFF

VOL/Par. Coarse]

3 . Key[ ]and[ ] switch with a page of the cursor position, adjust

other parameters (or with knob [MIC VOL/Cursor] for quickly

adjusted the cursor position).

4, the surrounding parameters are as follows:

(1) surround (left / right) volume:

Mute, -30dB~+6dB, step 0.5dB

(2) 7 bands PEQ(left / right):

Type:

PEQ/ Low-shelf / High-shelf

Frequency:

19.7Hz~20200Hz

Gain:

-15dB~+12dB, step 0.1dB

Bandwidth:

0.011~3.595

(3) High/low cut (left / right) :

Low cut frequency: 19.7 ~202Hz Hz

High frequency:

12100Hz~20200Hz

Roll-off of filters:

12dB, 18dB, 24dB, 36dB

Type of filters: Bessel, Butterworth, Linkwitz-Riley

(4) surround (left / right) matrix volume:

Music:

Mute, -30dB~0dB, step 0.5dB

Direct sound: Mute, -30dB~0dB, step 0.5dB

Echo:

Mute, -30dB~0dB, step 0.5dB

Reverberation: Mute, -30dB~0dB, step 0.5dB

(5) surround (left / right) phase:

0 / 180

(6) surround (left / right) delay:

On / off

0.0mS~21mS, step 0.1mS

(7) surround (left / right) compressor:

Off / Hard-knee / Soft-knee typeⅠ / Soft-knee type Ⅱ /

Soft-knee type Ⅲ / Soft-knee type Ⅳ / Soft-knee type Ⅴ

Threshold: -20dBu to 14.3dBu, step 0.5dBu

Ratio: 1:1 to 16:1, step 2:1

(8) surround link:

Yes / no

Setting menu

1 . Switch to a different page of the setting menu by continuous

press [Setting].

2 . Rotary knob [MUS VOL/EDIT] adjust the parameters, some

parameters can be rough adjusted by rotating the knob [EFF

VOL/Par. Coarse]

3 . Key[ ]and[ ] switch with a page of the cursor position, adjust

other parameters (or with knob [MIC VOL/Cursor] for quickly

adjusted the cursor position).

4. Setting parameters as follows:

(1) Initialized mode:

Auto save or User preset 1-3

(2) Limits of maximum volume:

Music:

Mute, or -30dB to +12dB, step 0.5dB

Microphone: Mute, or -30dB to +12dB, step 0.5dB

Effect:

Mute, or -30dB to +6dB, step 0.5dB

19.7Hz to 20200Hz

-15dB to +12dB, step 0.1dB

0.011 to 3.595

12dB, 18dB, 24dB, 36dB

Mute, or -30dB to 0dB, step 0.5dB

Main output:

Mute, or -30dB to +6dB, step 0.5dB

Center output:

Mute, or -30dB to +6dB, step 0.5dB

Subwoofer output: Mute, or -30dB to +10dB, step 0.5dB

(3) Limits of Gain of equalizer:

Music:

+6.0dB to +12.0dB, step 0.1dB

Microphone:

+6.0dB to +12.0dB, step 0.1dB

Effect:

+6.0dB to +12.0dB, step 0.1dB

Main output:

+6.0dB to +12.0dB, step 0.1dB

Center output:

+6.0dB to +12.0dB, step 0.1dB

Subwoofer output: +6.0dB to +12.0dB, step 0.1dB

(4) Automatic recovery of music pitch:

On / Off

Threshold: -30dB to 0dB, step 0.5dB

Time: 0 to 60S

(5) Sing and to disco mode switch:

Auto / Sing / Disco

Threshold: -30dB to 0dB, step 0.5dB

Time: 0 to 60S

Preset storage / recall

1. Preset storage

(1) Press Key [STO/RCL] to store Preset, then a confirmation

dialog appears, as shown below:

Save to

User preset 1? "Empty"

(2) Twist the knob [EDIT] to select the sequence number of

stack to be stored, the follow character indicates the status

of stack,"Used" or "Empty".

(3) Press key [STO/RCL] to confirm, there will be two

situations:

If the status of stack is "Empty", then will store directly to

finish the steps, Else if the status of stack is "Used", a

confirmation dialog will appears again, as shown below:

Cover user preset 1 ?

" " : No

(4) Press key [

] to cancel, key [

2. Preset recall

There are two ways to recall the user preset,

Ways1: Press keys [1],[2],[3] to recall the program 1-3 quickly

and directly.

Ways2:To recall more other user presets, the steps as follows:

(1) Press and hold the Key [STO/RCL], to enter the program

recalling process, a dialog as follows,

Recall

user preset 1 ? "used"

(2) Twist knob [EDIT] to select the sequence number of stack

to be recalled, the follow character indicates the status of

stack, "Used" or "Empty".

(3) Press key [STO/RCL] again to confirm the sequence

number, tip recalling failed and exit the recalling process if

the stack is "Empty". Otherwise forward to the final

confirmation if the stack is "Used", dialog as shown below.

Recall user preset 1 ?

" " : No

(4) Press key [ ] to cancel, key [ ] to confirm.

Initialized mode selection

Options [Initial] of the menu [Setting], to configure the initialized

mode, there are four options, Auto save and user presets 1-3.

": Yes

] to confirm.

": Yes