DIGISYSTEM DSC-103SD Manuale di istruzioni - Pagina 2
Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di laboratorio DIGISYSTEM DSC-103SD. DIGISYSTEM DSC-103SD 3. Digital micro centrifuge
Stampa la pagina
to set the speed value. Push the button
When you setting the RPM value, you can monitor the RCF value on the RCF/TIME display screen.
6. Push the button
to set the time value. Push the button
7. After setting parameters, push the button
the button
remaining time or RCF value on the RCF/TIME display screen.
8. Push the button
immediately. The centrifuge will run to the current speed setting value.
9. Under the conditions of power failure or the open function failure, please insert the "Emergency Bar"
into the hole at right hand side of centrifuge to force the lid open.
Maintenance and care:
1. Keep the centrifuge clean all the time. Cleaning can be done with a damp cloth. Avoid the use of
solvents as they may damage the product housing, rotor.
2. Check if the rotor is in the center. In case, the rotor is slanted. Stop using machine and contact the
distributor for repair.
Circuit Diagram:
DIGISYSTEM LABORATORY INSTRUMENTS INC.
, the time value is flash on the screen. Push the button
to stop the centrifuge. During operation, you can push the button
to start the centrifuge directly. Release the button and the centrifuge will stop
or any other function button to enter the speed value.
or any other function button to enter the time value.
to start the centrifuge. During operation, you can push
www.digisystemlab.com
or
or
to switch the
REV.2-2022