AccuTemp XLR8 Manuale d'installazione e d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Riscaldatore AccuTemp XLR8. AccuTemp XLR8 13. Upper heated platen

3.8 START UP PROCEDURE

1. Ensure both arms are square with

the griddle. Use the griddle sides as a

reference.

2. If adjustment is needed, loosen the nuts

that hold the lift assembly to the base lift

bracket.

3. Resecure the nuts once the arm assembly

has been squared.

3.8.1 INSTALL TEFLON SHEET

1. Raise the two teflon retaining handles off

the arm.

2. Secure one side of the teflon sheet using

one handle, keeping the handle at the

central point of the arm ("Figure 11").

3. Stretch the teflon across the underside

of the platen and secure with the other

retaining handle.

TEST INSTALL

1. Plug in lift power cord to correct NEMA

receptacle.

2. Power the XLR8 on using control buttons

located on top of the arm.

3. Keep arm elevated an allow to heat to

temperature displayed on control digital

display.

4. Monitor temperature using a fluke wand

meter.

5. Once unit has reached temperature allow

15 minutes for it to stabilize, then take

three temperature readings from the

front, middle and back of the arm cooking

surface.

6. The temperatures should be with 5+/-F of

the temperature displayed.

SP8144-2011

XLR8 Installation & Operation Manual