Digital Equipment Prioris Series Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Server Digital Equipment Prioris Series. Digital Equipment Prioris Series 15.
Anche per Digital Equipment Prioris Series: Manuale (16 pagine)

Stampa la pagina

Install any internal options

If you plan to use Quick Launch to install your Network

Operating System, your server must meet the following

minimum requirements to proceed with the server in-

stallation:

16 MB of RAM

SVGA monitor

540 MB minimum hard disk drive

Two or three button mouse

CD-ROM drive attached to the bootable SCSI controller

Keyboard

If you have options to install, install them now.

1. Unlock door

2. Remove side panel

3. Install options

NOTE

ISA cards should be installed after you run the System

Configuration Utility in Step 6 or 7 since the SCU will list

IRQs already used.

CAUTION

Before touching any circuit board or component,

wear an anti-static wrist strap, properly grounded

to the server chassis, or touch the metal frame to

discharge any static electricity.

Refer to the following chapters in the System Reference

manual for detailed information.

Server Software and Utilities

Server Components

Installing Additional Memory

Installing Disk and Tape Drives

Installing Expansion Boards

Connecting SCSI Adapters

Also, refer to the documentation that came with the option

kit for specific installation instructions.

Prioris Servers