Digital Equipment Prioris Series Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Digital Equipment Prioris Series. Digital Equipment Prioris Series 15 stron.
Również dla Digital Equipment Prioris Series: Podręcznik (16 strony)
Drukuj stronę2
Install any internal options
If you plan to use Quick Launch to install your Network
Operating System, your server must meet the following
minimum requirements to proceed with the server in-
stallation:
16 MB of RAM
SVGA monitor
540 MB minimum hard disk drive
Two or three button mouse
CD-ROM drive attached to the bootable SCSI controller
Keyboard
4
If you have options to install, install them now.
1. Unlock door
2. Remove side panel
3. Install options
NOTE
ISA cards should be installed after you run the System
Configuration Utility in Step 6 or 7 since the SCU will list
IRQs already used.
CAUTION
Before touching any circuit board or component,
wear an anti-static wrist strap, properly grounded
to the server chassis, or touch the metal frame to
discharge any static electricity.
Refer to the following chapters in the System Reference
manual for detailed information.
Server Software and Utilities
Server Components
Installing Additional Memory
Installing Disk and Tape Drives
Installing Expansion Boards
Connecting SCSI Adapters
Also, refer to the documentation that came with the option
kit for specific installation instructions.
Prioris Servers